Machine Photos
Lexington
Equipment Financing
Capital Infusion
Machine Finance
2016 - Case 580N EP Backhoe
()- Listing No
- 411634
- Year
- 2016
- Manufacturer
- Case
- Model
- 580SK
- Condition
- Used
- Location
- USA
- Price
- $53,000
- Description
-
BACKHOE MAKE BY CASE MODEL 580N EP YEAR 2016 HOURS 3,052.7 ENGINE FPT F5HFL463D / TURBO CHARGED / 4 CYL / 75 HP MANUAL TRANSMISSION 4F / 4R OPEN ROPS TRACTION 4WD REAR AUXILIARY HYDRAULICS (HAMMER KIT) VINYL SEAT REAR LEVER CONTROLS FOR THE BOOM FRONT MULTIPURPOSE BUCKET OF 83 IN REAR MULTIPURPOSE BUCKET OF 24 IN REAR “TAG” QUICK COUPLER FOR THE BUCKET REAR TIRES 17.5 L-24 FRONT TIRES 12-16.5 FUEL CAPACITY OF 31 GAL ELECTRICAL SYSTEM OF 12 VOLTS OPERATIONAL WEIGHT OF 16,940 LBS WE HAVE TESTED THIS UNIT WITH A HYDRAULIC HAMMER AND IT'S ALL WORKING GOOD, PLEASE CHECK THE LAST PICTURES AND VIDEOS. THE HYDRAULIC HAMMER IS A KENT F9 2020 AND IT CAN BE SOLD WITH THIS UNIT BUT THE COST WILL BE EXTRA OR WE CAN SELL THE HYDRAULIC HAMMER ONLY THANKS FOR WATCHING !!!
About this machine
This 2016 Case 580N EP is a used backhoe loader — also commonly called a loader backhoe or TLB — a versatile piece of construction equipment designed to dig, trench, lift, and load on a single chassis. Case is one of the most established names in construction and agricultural machinery, with a long history of producing backhoe loaders, dozers, and excavators for contractors, municipalities, utility companies, and civil engineering operations worldwide.
Power comes from an FPT F5HFL463D turbocharged four-cylinder engine rated at 75 horsepower, paired with a manual transmission offering four forward and four reverse gears. The machine is set up for four-wheel drive, giving it solid traction across varied ground conditions. The electrical system runs on 12 volts, and the fuel tank holds 31 gallons. Operating weight is 16,940 pounds.
The operator station features an open ROPS frame and a vinyl seat, with rear lever controls for the boom. Rear auxiliary hydraulics are fitted in a hammer-kit configuration, meaning the machine has the dedicated high-flow circuit and plumbing needed to run a hydraulic breaker directly from the factory setup. The front is equipped with an 83-inch multipurpose bucket, while the rear carries a 24-inch multipurpose bucket with a TAG quick coupler for straightforward bucket changes. Front tyres are 12-16.5 and rear tyres are 17.5 L-24.
The machine has logged 3,052.7 hours and has been tested under load with a hydraulic hammer, confirmed fully operational. A Kent F9 2020 hydraulic hammer — a 2020-model breaker attachment — is available for separate purchase alongside this unit but is not included in the listed price of $53,000.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
