2010 - Caterpillar 140M VHP Motor Grader

About this machine

This Caterpillar 140M VHP is a used motor grader — sometimes referred to as a road grader or a blade — a heavy construction machine designed to create and maintain flat, graded surfaces on roads, job sites, and earthworks projects. Caterpillar is one of the world's most recognised manufacturers of heavy construction and mining equipment, building machines trusted across road building, earthmoving, and infrastructure industries worldwide. This example was built in 2010, is located in Colorado, USA, and is offered for $95,500 in as-is, as-received condition.

Power comes from a Caterpillar C7.1 engine rated at 233 horsepower to Tier 3 emissions standards, fitted with a VHP Plus (Variable Horsepower) system that optimises output across different operating demands. An engine coolant heater rated at 120V assists cold-weather starting, and an ether starting aid is also included. A 150-amp alternator handles electrical loads, and the machine is fitted with extra-heavy-duty batteries. The transmission is a powershift unit with eight forward and six reverse speeds (F8-R6), providing good range for grading work. A transmission guard is fitted for protection.

The blade setup centres on a 14-foot, 24-inch by 7/8-inch moldboard, complemented by a curved cutting edge measuring 8 feet by 3/4 inch and standard end bits without overlay. A circle drive slip clutch protects the circle and ring gear assembly during operation. The differential features automatic lock and unlock functionality. Seven rear shanks are installed, adding ripping capability for breaking up compacted material. Grade control readiness is present via a wiring harness only — no control system is installed.

The cab is a low-profile design equipped with air conditioning, heating, and defrost, including a rear window defroster and fan. Operator controls include joystick steering, electronic throttle control with lock, and an automatic Electronic Integrated Steering (EIS) system with hydraulic lockout. The seat is an air-ride unit with cloth upholstery. A CAT Messenger display system is fitted, along with a 12-volt AM/FM weatherband radio with CB communication converter, a 12-volt power port, and an online owner's manual reference. The cab features a headliner, dome light, floor mat, and sun shade at the rear, with side windows fitted with wipers.

Lighting is extensive: front headlights, midframe and toe working lights in a 3x3 configuration, heel working lights also in a 3x3 layout, additional working lights, and a high-specification strobe beacon warning light on a dedicated mounting. Mirrors are outside heated 24-volt units, and an RV mirror is also included. A slow-moving vehicle (SMV) sign is fitted. The hydraulic system runs standard lines without an accumulator, and a hydraulic oil cooler cover and cold-weather hydraulic oil are specified. A toolbox is included.

The Samson GLR82-E2 tyres in size 14/24 are reported at approximately 42% remaining tread. A tow hitch and travel alarm round out the practical equipment. The machine carries a cold weather package, a comfort package, and covers for the screens. Note that no air compressor is fitted, and the grade control installation consists of the harness only, without any associated technology. The equipment certification code is listed as NCR.

This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.