2023 - Caterpillar PM-822 Cold Milling

About this machine

This Caterpillar PM-822 is a used cold milling machine — also commonly referred to as a road planer or pavement milling machine — designed to remove asphalt and concrete surfaces to a precise depth in preparation for road resurfacing, rehabilitation, or grade correction. Caterpillar is one of the world's most recognised manufacturers of heavy construction and infrastructure equipment, supplying machines to road-building, mining, and earthmoving industries globally. This example was built in 2023, is located in Kansas, USA, and is listed at $846,500.

The machine is powered by a CAT C18 engine and is fitted with a K Standard rotor running a 15 mm bit spacing, suited to fine milling applications. The cutting system includes a pneumatic bit removal tool and a dedicated cutting bit tray, streamlining bit changes in the field. A rotor turning device is also included to assist with maintenance access. Dust reduction is addressed by an additional 88-inch dust suppression system, and a high-pressure washing pump is fitted alongside a low-pressure washdown system. Water tank access is provided via a side fill valve and port as well as a dedicated filling port, though notably no water fill pump is installed. The fuel system is specified as standard tank configuration.

Grade and slope control is handled by the CAT Grade and Slope system, with sonic averaging sensors providing accurate surface referencing. An inboard ski is included for additional averaging support, and the machine features a telescoping steering guide. The display arrangement is a double centre setup, and the operator benefits from a full-size suspension seat. The conveyor is equipped with a camera for monitoring material flow, though no conveyor swing valve is fitted. The machine operates on the Lane 3 ordering specification and carries a North America regional configuration.

Additional equipment includes a hydraulic folding canopy, perimeter LED lighting, and a roll-on roll-off capability for ease of transport. The hydraulic system is filled with HYDO Advanced 10W oil. Documentation is well supported, with an online owner's manual and a serialised technical media kit included. A ventilation system is installed, and commissioning is noted as not required. The equipment certification code is NCR, and this machine is described as PM8 Common platform.

This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.