Machine Photos
Creditpath
Equipment Financing
Currency Finance
Finance Solutions
2007 - Dimter Profipress L25 Wood Press
()- Listing No
- 973085
- Year
- 2007
- Manufacturer
- Dimter
- Model
- Profipress L25
- Condition
- Used
- Location
- Germany
- Price
- POA
- Description
-
This DIMTER PROFIPRESS L2500 was manufactured in 2007. A robust used gluing press, it features a press bed of approximately 2500 x 1300 mm and a stable base frame. It includes a motor-driven multifunctional pusher and an automatic gluing station with a precision glue head. Ideal for both softwood and hardwood, it ensures even pressure distribution and high vertical pressure for low offset. Contact us for more information about this machine. Workpiece capacity:Lamella widths (for panels): 30–150 mmThicknesses: 11–60 mmInput length: 800–2500 mmPanel width: variable, up to max. 1300 mmFilling width per cycle: min. 650 mm / max. 1300 mmMax. filling area per cycle: 3.25 m²Note: Max. usable press width depends on individual lamella widthsIn multi-lane operation, filling widths may vary by max. 15 mmMinimum contact surface per press filling: ≥ 100 cm² Lamella widths (for panels): 30–150 mm Thicknesses: 11–60 mm Input length: 800–2500 mm Panel width: variable, up to max. 1300 mm Filling width per cycle: min. 650 mm / max. 1300 mm Max. filling area per cycle: 3.25 m² Note: Max. usable press width depends on individual lamella widths In multi-lane operation, filling widths may vary by max. 15 mm Minimum contact surface per press filling: ≥ 100 cm² Press performance:Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² Press bed and construction:Press bed area: approx. 2500 x 1300 mmStable base frame with lower press table in stainless steel (ground electrode)Upper pressure plate with hydraulic motor “anti-reb” feature for high vertical pressure and low offsetSpecial hydraulic pressure elements ensure even pressure over the joint and compensate tolerancesQuick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically movable to the current filling widthIntegrated hydraulic unit for press force and hydraulic motors Press bed area: approx. 2500 x 1300 mm Stable base frame with lower press table in stainless steel (ground electrode) Upper pressure plate with hydraulic motor “anti-reb” feature for high vertical pressure and low offset Special hydraulic pressure elements ensure even pressure over the joint and compensate tolerances Quick-change stop ruler sets for panel thicknesses 19–40 mm; hydraulically movable to the current filling width Integrated hydraulic unit for press force and hydraulic motors Electrical:Operating voltage: approx. 400 V / 50 HzElectrical connection value of press (without options): 7 kWElectrical connection value for 40 kW HF generator: 56 kW Operating voltage: approx. 400 V / 50 Hz Electrical connection value of press (without options): 7 kW Electrical connection value for 40 kW HF generator: 56 kW Controls and safety:Control cabinet and control panelProtective cover Control cabinet and control panel Protective cover Additional equipment Collection table extended to 3700 x 1300 mm (with stainless steel wood support) Motor-driven multifunctional pusher Additional individual pressure elements from above Automatic gluing station with precision glue head Feed system for different widths Camera Washing and rinsing device for glue head Modem with software for online connection application type: Pressing / Laminating Location: Germany machine type: Laminating Press Available from: 02/02/2026
About this machine
The Dimter Profipress L25 is a used wood press — sometimes referred to as a panel gluing press or laminating press — designed for bonding timber lamellas into solid wood panels under controlled hydraulic pressure. Dimter is a well-established German manufacturer of wood processing machinery, known for its optimising crosscut saws, finger-jointing lines, and gluing systems serving joinery, furniture production, and solid wood panel manufacturing. This machine was built in 2007 and is located in Germany, where it is available from February 2026.
The press accepts lamellas ranging from 30 to 150 mm in width and 11 to 60 mm in thickness, with input lengths between 800 and 2500 mm. Panel widths are variable up to a maximum of 1300 mm, with a filling width per cycle ranging from a minimum of 650 mm to a maximum of 1300 mm. The maximum filling area per cycle is 3.25 m², and the minimum contact surface per press filling is at least 100 cm². In multi-lane operation, filling widths may vary by up to 15 mm, and the maximum usable press width is dependent on the individual lamella widths being processed.
Pressing performance is rated at a specific pressing pressure of up to 1.6 N/mm², measured at a workpiece dimension of 2500 x 60 mm. The press bed measures approximately 2500 x 1300 mm and sits on a stable base frame. The lower press table is constructed from stainless steel, functioning as the ground electrode. The upper pressure plate incorporates a hydraulic motor with an anti-rebound feature, delivering high vertical pressure with low offset. Specially designed hydraulic pressure elements distribute force evenly across the glue joint and compensate for dimensional tolerances in the workpiece. Quick-change stop ruler sets covering panel thicknesses from 19 to 40 mm are included, and these are hydraulically movable to match the current filling width. An integrated hydraulic unit serves both the press force system and the hydraulic motors throughout the machine.
The electrical supply requirement is approximately 400 V / 50 Hz. The press itself draws 7 kW without optional equipment; the electrical connection value rises to 56 kW when the 40 kW high-frequency generator is in use. The machine is equipped with a control cabinet and control panel, along with a protective cover for operator safety.
This machine comes with a significant complement of additional equipment. The collection table has been extended to 3700 x 1300 mm with a stainless steel wood support surface. A motor-driven multifunctional pusher is fitted, as is an automatic gluing station with a precision glue head, a washing and rinsing device for the glue head, and a feed system accommodating different widths. Additional individual pressure elements acting from above are included, along with a camera system and a modem with software enabling online connectivity.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
