Machine Photos
Mortgage Choice
Equipment Finance
Wiseman Finance
Asset Finance
2020 - Dragon Loader CPCD30Condition and dimension of tyres Rough Terrain Forklift
()- Listing No
- 772549
- Year
- 2020
- Manufacturer
- Dragon
- Model
- CPCD30CONDITIO
- Condition
- Used
- Location
- China
- Price
- €17,300
- Description
-
3.0T Rough Terrain Forklift Truck 3.0T rough terrain forklift truck, 3000kg rough terrain forklifts, 3.0T rough terrain forklift truck, 3000kg rough terrain forklifts, rough terrain forklift capacity 3.0T, 3.0T capacity off-road forklift truck, rough terrain forklift capacity 3.0T, 3.0T capacity off-road forklift truck, 3000kg capacity cross-country forklifts, off-road forklift truck capacity 3000kg, 3000kg capacity cross-country forklifts, off-road forklift truck capacity 3000kg, cross-country forklift truck capacity 3.0T, 3000kg capacity off-road forklift truck, rough terrain fork lift, rough terrain fork lifts, 3 ton rough terrain fork lift, 3.0 ton rough terrain fork lift truck, 3 tonne rough terrain forklift Main features: 1. A larger ground clearance of the chassis enables the rough terrain forklift truck to overcome many kinds of complex terrain; 2. The off-road mobility is enhanced through by driver wheels with the MPT multi-function tires, wide base and cross-country tread pattern; 3. Uses the integral-type combination instruments, the fuse box places in left side of the steering wheel to make it easy to replace. The rough terrain forklift truck is also installed with a cigar lighter; 4. A yellow caution light. Outlay air filter and inside air filter increase the purification performance greatly; 5. Adopting Xinchang A498 Engine to ensure the powerful performance; 6. Adjustable damping seat with safety belt. Technical Specifications: Power Type: Diesel Rated Load Capacity: 3000kg Load Center: 500mm Standard Lifting Height: 3300mm Mast Tilt Angle (Forward/Backward): 10/12deg. Front Overhang: 600mm Wheelbase: 1850mm Wheel Tread (Front/Rear): 1350/1290mm Service Brake: Hydraulic-Foot Pedal Parking brake: Mechanical-Hand Lever Lifting Speed (Full-load/No-load): 380 / 520mm/s Lowering Speed (Full-load/No-load): Full-load 300mm/s Travel Speed (Full-load/No-load): 20 / 25km/h Max. Gradeability (No-load): 20% Engine Model: XINCHANG A498BPG Rated Power of Engine: 45kW / 2500rpm Max. Torque/rpm of Engine: 193Nm / 1800rpm Displacement of Engine: 3.168L Battery Voltage: 12V Battery Capacity: 100Ah Transmission Type of Gearbox: Hydraulic Gears Shift (F/R) of Gearbox: I/I Tyre Type: Pneumatic Tyres Tyre Model - Front: 14-17.5-14PR Tyre Model - Rear: 10-16.5-10PR Service Weight: 4600kg Free Lift: 120mm Fork Dimensions (TxWxL): 40x125x1070mm Overall Length (without Forks): 2930mm Overall Width: 1800mm Overall Height - Mast Extended: 4650mm Overall Height - Mast Lowered: 2342mm Height - Overhead Guard: 2452mm Min. Turning Radius: 3050mm Min. Ground Clearance - Below Mast: 220mm Min. Ground Clearance - Center of Wheelbase: 315mm Optional Engine: Model: 4JG2 Manufacturer: ISUZU Rated Power: 44.9Kw / 2450rpm Max. Torque: 186 N.m /1800rpm Displacement: 3.059L Note: 1. Technical specifications are for standard models only. 2. Other optional accessories, functions and requirements are available upon request. 3. All specifications and design characteristics are subject to change without prior notice.
About this machine
This Dragon Loader CPCD30 is a used rough terrain forklift — sometimes referred to as an off-road forklift or cross-country forklift — built to lift and transport heavy loads across uneven, unprepared ground such as construction sites, timber yards, agricultural settings, and similar demanding environments. Dragon Loader is a Chinese manufacturer specialising in industrial and materials-handling equipment. This 2020 example is located in China and is offered at €17,300.
The machine carries a rated load capacity of 3,000 kg at a 500 mm load centre, making it a 3-tonne class unit. Power comes from a Xinchang A498BPG diesel engine displacing 3.168 litres and developing 45 kW at 2,500 rpm, with a maximum torque of 193 Nm at 1,800 rpm. A 12 V, 100 Ah battery supports the electrical system. The hydraulic gearbox operates with a single forward and single reverse gear, and travel speeds reach 20 km/h under full load and 25 km/h unladen. Maximum gradeability unladen is rated at 20%.
Lifting performance centres on a standard lift height of 3,300 mm, with a free lift of 120 mm. The mast tilts 10 degrees forward and 12 degrees backward. Lifting speed is 380 mm/s at full load and 520 mm/s with no load, while the full-load lowering speed is 300 mm/s. The forks measure 40 × 125 × 1,070 mm.
Dimensional figures place the overall length without forks at 2,930 mm, overall width at 1,800 mm, and the mast-lowered height at 2,342 mm, extending to 4,650 mm with the mast raised. The overhead guard stands at 2,452 mm. The wheelbase is 1,850 mm, with a front wheel tread of 1,350 mm and a rear tread of 1,290 mm. Ground clearance below the mast is 220 mm, rising to 315 mm at the centre of the wheelbase — figures that underpin the machine's ability to traverse rough ground. The minimum turning radius is 3,050 mm, and service weight is 4,600 kg.
The rough terrain capability is supported by pneumatic tyres: PR fronts and PR rears, described as MPT multi-function tyres with a wide base and cross-country tread pattern. Braking is handled by a hydraulic foot-pedal service brake and a mechanical hand-lever parking brake. Additional features noted include an adjustable damping seat with seat belt, integral combination instruments, a conveniently positioned fuse box, a cigar lighter, a yellow caution warning light, and a dual-stage air filtration arrangement combining an external and an internal air filter. An optional Isuzu 4JG2 engine — displacing 3.059 litres and rated at 44.9 kW at 2,450 rpm with 186 Nm of torque at 1,800 rpm — is available as an alternative power unit.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
