Machine Photos
DLL Financing
Equipment Financing
Al Omaniya
Equipment Finance
2020 - Dragon Machinery LPG Forklift CPQD30Condition and dimension of tyres Gas Forklift
()- Listing No
- 763118
- Year
- 2020
- Manufacturer
- Dragon
- Model
- LPG Forklift C
- Condition
- Used
- Location
- China
- Price
- €13,350
- Description
-
3.0T gasoline forklift, 3.0T LPG forklift, 3.0T propane forklift, 3T dual-fuel forklift truck, 3T LPG forklift truck, 3T gasoline forklift truck, 3T propane forklift truck, 3 ton LPG fork lift, 3 ton propane fork lift, 3 ton gasoline/LPG forklift, 3 ton LPG forklift truck, 3 ton gasoline forklift truck, 3 ton dual-fuel forklift, 3 ton LPG forklift, 3 ton gasoline forklift, 3.0T gas forklift, gasoline forklift capacity 3000kg, LPG forklift capacity 3000kg, propane forklift capacity 3000kg, 3.0 ton capacity gasoline forklift truck, 3.0 ton capacity LPG forklift truck, 3.0 ton propane forklift truck, 3.0T gasoline fork lift truck, 3.0T LPG fork lift truck, 3.0T propane fork lift truck, 3.0T dual-fuel fork lift truck, 3.0T gas fork lift truck, 3.0T counterbalanced gasoline forklift truck, 3.0 ton counterbalance LPG forklift, 3 ton counterbalanced dual-fuel forklift, 3T counterbalance propane forklift Features: 1. Good Power Performance Engine; The engine has good power performance, runs stably and has features such as low noise, low vibration and low fuel consumption, etc. 2. Low Carbon Emission; The fuel of LPG achieves low carbon emission, which plays an active role in environmental protection. 3. Precise Design and Stringent Test; All parts for the “fuel element” adopt the OEM products from IMPCO USA, so the performance is guaranteed by precise design and stringent test. Meanwhile, because LPG has higher ignition point than gasoline and bigger gasification potential, that is having self-cooling function, therefore the safety is greatly reinforced. 4. Easy, Reliable and Comfortable Operating; Using gasoline or LPG as the fuel, the conversion between these two fuels is easy and reliable, and the operation is comfortable. 5. 24 /7 Work; Equipped with big capacity fuel/gas tank, this forklift is fit for 24/7 work. Technical Specifications: Power Type: Gasoline/LPG Rated Capacity: 3000kg Load Center: 500mm Lifting Height: 3000mm Mast Tilt Angel (F/R): 6/12Deg Front Overhang: 485mm Wheel Base: 1700mm Wheel Tread (F/R): 1000/980mm Dead Weight: 4270kg Free Lift Height: 165mm Min. Turning Radius: 2410mm Min. Ground Clearance - Under Mast: 120mm Min. Ground Clearance - Wheelbase Center: 160mm Service Brake: Hydraulic-Foot Pedal Parking Brake: Mechanical-Hand Lever Lifting Speed (full-load): 360mm/s Lowering Speed: Full-load < 600mm/s, No-load > 300mm/s Travel Speed (no-load): 19km/h Max. Gradeability (full-load): 20% Max. Tractive Force (full-load/no-load): 18/14kN Weight Distribution with load (F/R): 6395/875kg Weight Distribution without Load (F/R): 1620/2650kg Engine Model: K25 Engine Manufacturer: NISSAN Engine Rated Power: 37.4kW/2300rpm Max. Torque/rpm of Engine: 176.5N•m/1600rpm Engine Displacement: 2.488L Battery Voltage: 12V Battery Capacity: 100Ah Gearbox Transmission Type: Hydraulic torque converter Gear Shift (F/R): I/I Tyre Type: Pneumatic Tyres Tyre Model – Front: 28x9-15-14PR Tyre Model – Rear: 6.5-10-10PR Fork Dimension: 45x125x1070mm Overall Length (Without Fork): 2770mm Overall Width: 1225mm Overall Height Mast Extended: 4225mm Overall Height Mast Lowered: 2070mm Overall Height Overhead Guard: 2160mm Note: 1. Technical specifications are for standard models only. 2. Other optional accessories, functions and requirements are available upon request. 3. All specifications and design characteristics are subject to change without prior notice.
About this machine
This Dragon CPQD30 is a used gas forklift — also commonly referred to as an LPG forklift — built in 2020 and currently located in China, offered at €13,350. Gas forklifts of this type are counterbalanced lift trucks powered by internal combustion engines running on gasoline, liquefied petroleum gas, or both, and are widely used in warehousing, logistics, manufacturing, and outdoor material handling where electric forklifts are less practical. Dragon Machinery is a Chinese manufacturer specialising in a range of forklift trucks for industrial and logistics applications.
The machine has a rated lifting capacity of 3,000 kg at a 500 mm load centre and a standard lifting height of 3,000 mm, with a free lift height of 165 mm. The mast tilts 6 degrees forward and 12 degrees rearward. A full-load lifting speed of 360 mm/s is quoted, with lowering speed limited to below 600 mm/s under load and above 300 mm/s unladen. Travel speed without load reaches 19 km/h, and maximum gradeability under full load is 20%.
Power comes from a Nissan K25 engine displacing 2.488 litres, rated at 37.4 kW at 2,300 rpm, with a peak torque of 176.5 N·m at 1,600 rpm. The drivetrain uses a hydraulic torque converter transmission with a single forward and single reverse gear range. The electrical system runs on a 12 V battery with a 100 Ah capacity. A key feature of this model is its dual-fuel capability: the forklift can operate on either gasoline or LPG, with the fuel-system components sourced from IMPCO USA. Switching between fuels is described as straightforward, and the LPG mode offers lower carbon emissions and a higher ignition point than gasoline, which contributes to operational safety. A large-capacity fuel tank makes the machine suitable for extended or continuous operation.
The braking system consists of a hydraulic foot-pedal service brake and a mechanical hand-lever parking brake. Maximum tractive force is 18 kN at full load and 14 kN unladen. The machine rides on pneumatic tyres — 28x9-15-14PR at the front and PR at the rear — and the forks measure 45 × 125 × 1,070 mm.
Key dimensions include an overall length without forks of 2,770 mm, an overall width of 1,225 mm, and a wheelbase of 1,700 mm. The front and rear wheel treads are 1,000 mm and 980 mm respectively. With the mast lowered the overall height is 2,070 mm, rising to 4,225 mm at full mast extension; the overhead guard stands 2,160 mm tall. Ground clearance is 120 mm under the mast and 160 mm at the wheelbase centre. The minimum turning radius is 2,410 mm, and the machine's dead weight is 4,270 kg.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
