This Evers Soco T-- is a cardboard packing machine — sometimes referred to as a carton sealing machine or case sealer — used to close and seal corrugated cartons with adhesive tape. The listing covers not a single unit but a complete packing line made up of six interconnected pieces of equipment, each described in detail below.
The centrepiece of the line is the Soco T-10 carton sealer, manufactured in 2012. It is rated for a sealing capacity of 30 cartons per minute and accommodates a working height range of 620 mm to 720 mm. Cartons can range from a minimum of 90 mm × 80 mm (X/Y) up to a maximum of 515 mm × 520 mm. The machine applies adhesive tape with an overlap of 70 mm and accepts tape rolls up to 385 mm in diameter. The unit weighs approximately 200 kg.
Upstream of the sealer sits the Soco F-100-5 bottom flap folder, also from 2012, which prepares the base of each carton before sealing. It handles carton widths between 190 mm and 240 mm, accommodates carton lengths up to 620 mm, and has a machine footprint of approximately 460 mm × 895 mm.
Product is moved through the line by a roller conveyor system built from plastic rollers 48 mm in diameter. The conveyor is 2,500 mm long and 300 mm wide, with a centre-to-centre roller spacing of 60 mm.
The line also includes a Rhewa 82 Basic weighing system capable of weighing loads up to 150 kg, providing in-line weight checking. A U-shape Ecoline lift table with a platform measuring 1,450 mm × 1,140 mm handles pallet or product positioning; it has a maximum load capacity of 1,000 kg and a maximum lifting height of 760 mm.
Rounding out the line is a J. Schmalz Jumbo Sprint 45-Zent vacuum tube lifter, manufactured in 2003, designed to assist operators in lifting and placing products without manual strain. It has a load capacity of 45 kg, a maximum lifting speed of 60 m/min, and a maximum lift of 1,800 mm. The unit is equipped with four suction cups, each 110 mm in diameter, mounted on a gripper 112 mm in height. The lifting column has an inner diameter of 140 mm, an overall length of 2,550 mm, and the unit weighs approximately 100 kg.
The machine is from 2012, offered in used condition, and is located in Germany. Documentation is available, and an on-site inspection can be arranged.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.