This used Fruehauf flatbed semi-trailer — sometimes referred to as a flat-deck or platform trailer — is a three-axle articulated freight trailer designed to carry heavy, oversized, or irregularly shaped loads that cannot be accommodated within an enclosed body. Fruehauf is one of the longest-established names in commercial trailer manufacturing, with a history of producing semi-trailers for road haulage, construction, forestry, and general freight applications across Europe and beyond. This example is located in the Netherlands and is offered at €9,800.
The trailer is built on a chassis with a height of 100 cm, a kingpin diameter of 2 inches, and a fifth-wheel coupling plate height of 120 cm. The cargo floor sits at a loading height of 145 cm, and the trailer is fitted with a platform body. Overall shipment dimensions are 1,310 × 255 × 395 cm, giving a total length of approximately 13 metres, a width of around 2.55 metres, and a stacked height of 3.95 metres. The three axles are all SAF-brand units, running on single 385/65 R22.5 tyres throughout. The first axle is a lift axle, allowing it to be raised when the trailer is running empty or lightly loaded to reduce tyre wear and axle stress. The third axle is a steering axle, improving manoeuvrability when negotiating tight turns. All three axles are equipped with disc brakes, and the trailer runs on air suspension. ABS is fitted as standard. Tyre profiles as recorded are: Axle 1 — 20% left, 25% right; Axle 2 — 20% left, 30% right; Axle 3 — 30% left, 45% right. The trailer also carries a fuel tank and is registered under number C142530, with serial number 3W640710.
The trailer is equipped with an Atlas 3008 loading crane, which is mounted so that it can travel along the full length of the trailer bed. The crane features one hydraulic extension, a rotator, and a grapple (squeeze box), making it well suited for handling timber, scrap, or other loose bulk materials without the need for slings or chains. Maximum crane reach is 507 cm, and the rated load capacities are 3,900 kg at 213 cm, 2,130 kg at 377 cm, and 1,580 kg at the full 507 cm extension. The crane is powered by an independent Hatz 2L41C auxiliary diesel engine, meaning loading and unloading operations can be carried out without the tractor unit present.
Prospective buyers should note that this is a non-duty-free vehicle and requires customs clearance prior to import.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.