The Genie GTH844 is a used telehandler — sometimes referred to as a telescopic handler or reach forklift — a versatile lifting machine designed to place, retrieve, and carry loads across rough or uneven terrain. Telehandlers combine the reach and elevation of a crane with the load-handling capability of a forklift, making them a staple on construction sites, agricultural operations, and industrial facilities. Genie is a well-established manufacturer of aerial work platforms and material-handling equipment, serving the construction, industrial, and rental sectors worldwide.
This 2019 machine is located in Texas, USA, and is offered at $94,500, with financing and delivery available. It is ready for immediate purchase from current stock.
Power comes from a Deutz 3.6TCD turbocharged diesel engine producing 74 gross horsepower, meeting EPA Tier 4 Final emissions standards. The engine runs on a 12-volt electrical system and is supported by a 1000 CCA battery rated at 0°F. Fuel capacity is 32 gallons.
The telehandler delivers a maximum lift capacity of 8,000 pounds and can lift 6,001 pounds to its maximum lift height of 43.84 feet. Maximum forward reach extends to 28.19 feet, with a lift capacity of 2,000 pounds at maximum reach. At maximum height, forward reach measures 25.2 inches. These figures reflect the typical load-chart trade-off between height, reach, and safe working load.
Drive is handled by a three-speed powershift transmission in both forward and reverse, with a maximum forward speed of 17.1 mph and a governed drive speed of 15 mph. Drawbar pull is rated at 20,999 pounds, reflecting strong tractive effort on demanding terrain. Tires are 13 × 24-inch, 12-ply units suited to rough-ground use.
The hydraulic system operates at 3,000 psi auxiliary pressure and delivers a flow of 15 gallons per minute through a variable-displacement pump. Boom cycle times are 10 seconds to extend, 14 seconds to retract, 13 seconds to raise, and 9 seconds to lower.
Dimensionally, the machine measures 20.25 feet in length to the fork face, 8.14 feet wide over the tires, and 7.85 feet in overall height, with a wheelbase of 11.32 feet and a ground clearance of 1.42 feet. Outside turning radius is 14.77 feet. Operating weight is 22,500 pounds. The hydraulic system fluid capacity is listed at 55,000 gallons, which is almost certainly a data entry error and should be confirmed directly with the seller prior to purchase.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.