Machine Photos
BusinessLoans
Business Loans
Mehmi Financial
Equipment Finance
2003 - Italpresse Through Feed Press Line Wood Press
()- Listing No
- 962397
- Year
- 2003
- Manufacturer
- Italpresse
- Model
- Condition
- Used
- Location
- Germany
- Price
- POA
- Description
-
Preis: Contact us for price Technical Description Model MARK/C 20-32.5 Manufacturer ITALPRESSE Year of Manufacture 2003 Line Function Designed for laminating veneer on chipboard MDF and plywood panels Components of the Line Vacuum Loading Unit For loading thin panels from the scissor lift into the brushing machine Passage Width 2000 mm Translation Speed Adjustable 7–35 m/min Cycle per Minute 3–5 (depending on panel size) Suction Cups 6 Brushing Machine Working Width 2000 mm Max Opening Height 100 mm Rollers 2 motorized brushing rollers (180 mm diameter) 2 forwarding rollers (125 mm diameter) Glue Spreader (Brand: Osama) 2 spreading rollers 2 dosing rollers 4 motors Index Table for Automatic Composition Belt dimensions: 2000 × 4000 mm Features photocells and a stop bar for precise alignment Automatic Press Model MARK/C 20-32.5 Platens Dimensions 2000 × 3250 mm Daylight Opening 140 mm Thrust 390 tons Specific Pressure 7.5 kg/cm² on 80% of the surface Diathermic oil (heating system not included) Pistons 9 pressure pistons (150 mm diameter) 4 movement pistons Stroke: 140 mm Additional Features Upper platen belt shaker Planarity control Down stroking brake Unloading Device Dimensions: 2000 × 4000 mm Translation Speed: 20–40 m/min Synchronized with the pressing belt Control Board Includes electrical and programmable logic controls Voltage 400 V / 50 Hz 3-phase Heating System with Diathermic Oil (Optional) Electric heating boiler: 900 kW Riello oil burner: 860 kW 2-step flame Find more here show contacts Contact us at show contacts Show the whole comment
About this machine
This Italpresse MARK/C 20-32.5 is a used wood press — sometimes referred to as a panel press or laminating press — configured as a complete through-feed production line designed for laminating veneer onto chipboard, MDF, and plywood panels. Italpresse is a well-established Italian manufacturer specialising in industrial pressing and laminating equipment for the wood-based panel industry, supplying production lines to furniture manufacturers and panel processors worldwide. This line was built in 2003 and is currently located in Germany.
The line is made up of several integrated stations working in sequence. At the infeed end, a vacuum loading unit draws thin panels from a scissor lift and feeds them into the brushing machine. This unit operates at a passage width of 2,000 mm, a translation speed adjustable between 7 and 35 m/min, and a cycle rate of 3 to 5 cycles per minute depending on panel size. Six suction cups handle the panel transfer.
The brushing machine prepares panel surfaces ahead of gluing, with a working width of 2,000 mm and a maximum opening height of 100 mm. It is equipped with two motorised brushing rollers of 180 mm diameter and two forwarding rollers of 125 mm diameter. Glue application is handled by an Osama-brand spreader fitted with two spreading rollers, two dosing rollers, and four motors.
An index table with belt dimensions of 2,000 × 4,000 mm then positions the panels for pressing. It incorporates photocells and a stop bar for precise automatic alignment of the veneer composition before it enters the press.
The heart of the line is the automatic press itself. Its platens measure 2,000 × 3,250 mm with a daylight opening of 140 mm. The press delivers a thrust of 390 tonnes, achieving a specific pressure of 7.5 kg/cm² across 80% of the platen surface. Pressing force is generated by nine pressure pistons of 150 mm diameter, with four additional movement pistons and a stroke of 140 mm. The heating system uses diathermic oil circulation; the heating boiler itself is not included as standard but is available as an optional addition — either an electric boiler rated at 900 kW or a Riello oil burner rated at 860 kW with a two-step flame. Additional press features include an upper platen belt shaker, planarity control, and a down-stroking brake.
At the outfeed, an unloading device measuring 2,000 × 4,000 mm removes finished panels at a translation speed of 20 to 40 m/min, synchronised with the pressing belt to ensure continuous throughput. The entire line is controlled via a panel housing electrical and programmable logic controls, and is rated for 400 V / 50 Hz, three-phase supply.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
