Machine Photos
Mehmi Financial
Equipment Finance
Lexington
Equipment Financing
2017 - Jungheinrich EKX514 Scissorlift
()- Listing No
- 429341
- Year
- 2017
- Manufacturer
- Jungheinrich
- Model
- Condition
- Used
- Location
- USA
- Price
- $78,900
- Description
-
3000# CAP 80V MAN UP TURRET, 177/107"MAIN MAST, W/70" AUX LFT, MAST DISASSEMBLED, SIDESHIFT ATT, 4 BATTERY ROLLERS, SINGLE TRAY, CRANE ARM 4PALLET DRIVE DIR B12 , WIDTH OVER AXLE B2=63"/1600 MM, SINGLE HAND OPERATION IN AISLE ADDITIONAL LIFT CUT-OUT W/OVRIDE ,ADDL DRIVE LIMIT W/OVERRIDE, AUDIBLE WARNIN SIGNAL FOR MOTION FLOOR SPOT, LOAD DIRECTION BLUE FLOOR SPOT, DRIVE DIRECITON BLUE, DC/DC CONVERTER; 24V/150W,REAR VIEW MIRRORS - LEFT & RIGHT CLIP BOARD SYNCHRONIZED TRAVERSE OUTSIDE AISLE W/FORK FLOOR PRO,WIREGUIDANCE (IF)STD 7KHZ/100MA, END OF AISLE CONTROL VIA TRANSPONDERS, AREA DEPENDENT TRAVEL SPEEDCONTROL VIA ,WIRE GUIDANCE FREQUENCY TOGGLESWITCH F1-F2
About this machine
This used Jungheinrich EKX514 is a scissorlift — sometimes referred to as a VNA (very narrow aisle) turret truck — offered for sale in California, USA, at $78,900. Scissorlifts of this type are designed for high-bay warehouse operations, combining man-up operator positioning with precise load handling in extremely tight aisle configurations. Jungheinrich is a well-established German manufacturer of industrial forklifts, warehouse equipment, and intralogistics systems, with a broad product range serving distribution, manufacturing, and logistics operations worldwide.
The machine is rated at a 3,000 lb load capacity and is powered by an 80-volt system. It features a man-up turret configuration, allowing the operator to rise with the load for accurate placement at height. The main mast is listed at 177 inches raised and 107 inches lowered, supplemented by a 70-inch auxiliary lift. The mast has been disassembled, which should be noted when planning transportation and reassembly. A sideshift attachment is included, and the unit is configured for single-hand operation in-aisle.
Width over the axle (B2) measures 63 inches or 1,600 mm. The drive direction is configured as B12, and the machine comes with a single tray arrangement, four battery rollers, a crane arm, and rear-view mirrors on both the left and right sides. A clipboard holder is also fitted. A DC/DC converter rated at 24V/150W is installed to support ancillary electrical systems.
The EKX514 is equipped with a comprehensive suite of aisle-guidance and safety features. Wire guidance is fitted as standard at 7 kHz / 100 mA, with a frequency toggle switch allowing selection between F1 and F2. End-of-aisle control is managed via transponders, and area-dependent travel speed control operates through the wire guidance system. Additional safety provisions include an audible warning signal for motion, a load-direction blue floor spot, a drive-direction blue floor spot, an additional lift cut-out with override, and an additional drive limit with override. Synchronized traverse is available outside the aisle with fork floor protection, rounding out a well-specified narrow-aisle handling package from a 2017 build year.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
