Machine Photos
Wiseman Finance
Asset Finance
Mehmi Financial
Equipment Finance
2009 - Multivac R105 Thermoforming Machine
()- Listing No
- 1092783
- Year
- 2009
- Manufacturer
- Multivac
- Model
- R105
- Condition
- Used
- Location
- Netherlands
- Price
- POA
- Description
-
Dieptrekmachine Multivac R105 Multivac R 105 thermoformer, een compacte en betrouwbare dieptrek verpakkingsmachine van het topmerk Multivac. Deze Multivac R105 is ideaal voor professionele voedselverpakking in onder andere slagerijen, visverwerking, kaasproductie, catering, horeca en voedingsindustrie. De Multivac R105 thermoformer is een halfautomatische thermoformer voor het vormen en sealen van verpakkingen. Geschikt voor vacuümverpakken en MAP-verpakken (gasverpakking) van diverse producten zoals vlees, vis, kaas, maaltijden en non-food. Dankzij het compacte ontwerp is deze machine perfect voor bedrijven met beperkte ruimte, zonder in te leveren op kwaliteit en betrouwbaarheid. Deze dieptrekmachine is volledig vervaardigd uit roestvast staal. Productiecapaciteit: 10 slagen/min (afhankelijk van instellingen) Functies: vacuüm, MAP verpakken (begassing) De machine is uitgerust met een Multivac HMI touchscreen bedieningspaneel Voorzien van formaatdeel 2.4 (circa 47 x 103 mm) Type folie: hard Foliebreedte: 288 mm (onder), 284 mm (boven) Afslaglengte: 240 mm Foliespot op de bovenfolie Lengte van de inlegzone: 700 mm Voorzien van 120m3/h Busch vacuümpomp Lengteversnijding door middel van 5 roterende messen Voorzien van 2 stansen Voorzien van Multivac ASE530 lintzuiger (760 x 700 x 1630 mm) Aansluitwaarde water: 1,5 – 4,5 bar Aansluitwaarde perslucht: 7 – 10 bar Spanning: 220 V (3 + N, 60 Hz) Vermogen: 6 kW Gewicht: 1045 kg Bouwjaar: 2009 Afmetingen machine in mm (BxDxH): 3440 x 1050 x 1800 mm Type machine: Dieptrekmachine Productiecapaciteit: 10 slagen/min Materiaal: RVS Spanning: 220V (3+N, 60Hz) Aansluitwaarde Perslucht: 7 – 10 bar Aansluitwaarde Water: 1,5 – 4,5 bar
About this machine
This Multivac R105 is a thermoforming machine — sometimes referred to as a deep-draw packaging machine — designed to form, fill, and seal flexible packaging from roll film. Thermoformers of this type heat a lower web of film, draw it down into a mould to create a cavity, accept a product, apply an upper lidding film, and then seal and cut individual packs, making them a cornerstone of modern food packaging lines. Multivac is a well-established German manufacturer recognised worldwide for its packaging machinery, with thermoformers, tray sealers, and vacuum packaging equipment at the heart of its product range, serving the food processing, meat, fish, dairy, and catering industries.
This particular machine is a semi-automatic thermoformer built entirely from stainless steel, making it well suited to hygienic food production environments. It supports both vacuum packaging and MAP (modified atmosphere packaging, also known as gas flushing), which allows it to handle a wide variety of products including meat, fish, cheese, ready meals, and non-food items. The compact footprint — 3,440 mm long, 1,050 mm wide, and 1,800 mm tall — makes it practical for facilities where floor space is limited, and the machine weighs 1,045 kg. It is controlled via a Multivac HMI touchscreen panel.
Production capacity is rated at up to 10 strokes per minute, depending on settings. The machine is fitted with format tooling size 2.4, giving a pack cavity of approximately 47 × 103 mm. The lower film width is 288 mm and the upper film width is 284 mm, with a draw-off length of 240 mm and a loading zone length of 700 mm. The upper film is equipped with a film spot registration system. Longitudinal trimming is carried out by five rotating knives, and the machine is equipped with two punching dies for cross-cutting finished packs.
Vacuum is provided by a Busch vacuum pump rated at 120 m³/h. The machine also includes a Multivac ASE530 belt conveyor with suction, measuring 760 × 700 × 1,630 mm, for handling packs as they exit the machine. Electrical supply is 220 V (3 + N, 60 Hz) with a connected power of 6 kW. Compressed air connection requires 7 to 10 bar, and the water connection requires 1.5 to 4.5 bar. The machine was manufactured in 2009, is offered in used condition, and is located in the Netherlands.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
