Machine Photos
Currency Finance
Finance Solutions
BusinessLoans
Business Loans
2025 - OMC PL 90S Wood Press
()- Listing No
- 973037
- Year
- 2025
- Manufacturer
- OMC
- Model
- PL 90S
- Condition
- Used
- Location
- Germany
- Price
- POA
- Description
-
This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Plate size: 3000 x 1300 mm Stroke type: upward stroke (from bottom to top) Plate type: elkom electronic plates Press force: 90 tons on 80% of the surface Press cylinder: 6 x Ø 70 mm Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface Loading and unloading side: 3000 mm Heating system: electronic 25. 4 kw, maximum temperature of 120°c Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm² application type: Pressing / Laminating Location: Italy machine type: Veneer Press Max. Stroke: 400 mm
About this machine
The OMC PL 90S is a wood press — sometimes referred to as a veneer press or laminating press — designed for pressing and laminating veneers and sheet materials. OMC is an Italian manufacturer known for producing woodworking presses and related equipment for the furniture and wood-panel industry. This example was manufactured in 2025 and is offered in used condition from a seller based in Germany.
The press features heated platens measuring 3,000 × 1,300 mm, accommodating large panel formats, with the loading and unloading access positioned along the 3,000 mm side. The stroke is upward-acting, meaning the lower platen travels from bottom to top during the closing cycle, and the maximum stroke travel is 400 mm. Press force is rated at 90 tons distributed across 80% of the platen surface, delivered through six cylinders each with a bore diameter of 70 mm. The resulting specific pressure figures are 2.05 kg/cm² across 100% of the surface and 2.56 kg/cm² across 80% of the surface, with the Elkom heating plates themselves rated for a maximum thrust of 7 kg/cm².
The heating system is fully electronic, drawing 25.4 kW, and the platens are constructed from chipboard with an aluminium sheet mounting electric resistors. Two independent temperature regulators allow the upper and lower platen temperatures to be set separately, and maximum working temperature is 120°C. The platen lock mechanism allows safe access during maintenance.
The hydraulic system is built around a two-stage unit with a submersible pump, which reduces operating noise and provides lubrication for rotating components. Two pump circuits handle different phases of operation: a high-flow, low-pressure pump running at 35 litres per minute manages rapid closing and opening, while a low-flow, high-pressure pump at 1.6 litres per minute handles the actual pressing cycle. The hydraulic motor is rated at 2 HP. The control valve arrangement includes a maximum pressure valve, a pressure retention check valve, a pre-drain valve for low drain pressure, and an oil drain magnetic valve. A pressure gauge with automatic pressure equalisation is fitted to the control panel.
The press is guided by a rack and pinion system on all four corners, ensuring the platens remain parallel throughout the full closing and opening movement. The control panel provides a general on/off switch, a manual/automatic opening selector, separate resistance switches for upper and lower platens, a timer for automatic opening after the work cycle, and a pressure gauge. Safety provisions include a timed two-hand bimanual control required to initiate closing, a safety rope running around all four sides of the machine, an emergency stop button, a platen lock for maintenance access, and protective guards over the rack and pinion units. Safety stickers and warning notices are fitted as standard. The machine is constructed from composite and welded steel, complies with CE standards, and is supplied with an operating and maintenance manual.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
