Machine Photos
Creditpath
Equipment Financing
Mortgage Choice
Equipment Finance
1997 - SCM Sergiani LAS P Wood Press
()- Listing No
- 965834
- Year
- 1997
- Manufacturer
- SCM
- Model
- Sergiani LAS P
- Condition
- Used
- Location
- Austria
- Price
- POA
- Description
-
No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the doors one after the other, while the pressure on the doors in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location Our general terms and conditions apply, which can be viewed on the Internet at show contacts Please pay particular attention to Article 9 regarding complaints and returns!
About this machine
This SCM Sergiani LAS P is a wood press — sometimes referred to as a daylight press or multi-opening press — designed for continuous, high-volume laminating and bonding operations in door and panel manufacturing. SCM is a well-established Italian manufacturer of woodworking machinery, supplying equipment for furniture production, panel processing, and surface finishing to industrial manufacturers worldwide.
Built in 1997, this is a ten-stage multi-daylight through-feed press configured for automatic continuous operation. It is engineered for the production of flush and veneered doors, HPL- and CPL-faced doors, and two- to three-layer pre-treated parquet. The continuous-feed design allows panels to be loaded one after another without interrupting pressure on the workpieces already inside the press: with a total pressing cycle of approximately three minutes spread across ten levels, the press opens every 18 seconds to accept a new panel, enabling a factory-rated output of up to 1,200 doors per shift. Up to two operators are required to run the complete line.
The pressing force is approximately 5.5 kg/cm², with a total clamping force of 200 tonnes. The press accepts panels up to approximately 2,500 × 1,300 mm and uses hot-water heating. The complete production line includes a vacuum loading system with a two-lane infeed roller conveyor, a scissor lift table with a loading belt measuring approximately 2,900 × 1,000 mm, and a vacuum stacking station with an outfeed roller conveyor. Gluing equipment is not included.
The footprint of the press with its loading table is approximately 6,500 × 2,365 mm; the full production line requires approximately 25,000 × 5,710 mm of floor space. The machine has been dismantled and is currently in storage near Salzburg, Austria, and was in active production at the time of decommissioning.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
