2020 - Tadano GR 750XL-3 Rough Terrain Crane

About this machine

This Tadano GR 750XL-3 is a used rough terrain crane — sometimes referred to as an RT crane — dating from 2020 and currently located in Alberta, Canada. Rough terrain cranes are purpose-built for lifting and positioning heavy loads on unpaved, uneven, or soft ground, combining a telescoping boom with a self-propelled wheeled carrier designed to operate where conventional equipment cannot. Tadano is a globally recognised manufacturer of cranes and aerial work platforms, supplying construction, industrial, infrastructure, and energy sectors worldwide.

The crane is powered by a Cummins QSB6.7 turbocharged engine producing 270 horsepower, driving through an electronically controlled automatic transmission via torque converter. Recorded hours stand at approximately 2,940. The carrier runs a 4×4×4 drive and steer configuration with a non-spin rear differential and an automatic rear axle oscillation lockout system, and is fitted with PR or PR off-road tires.

The main lifting system centres on a five-section full-power partially synchronised boom spanning 36.1 to 141.1 feet. A quick-reeving bi-fold lattice jib is included in two configurations — 33.2 feet or 58.1 feet — of the tilt type, with pinned offsets of 3.5°, 25°, or 45° and self-storing pins. An auxiliary lifting sheave (single top), stowable, is also fitted.

Two variable-speed hoists are provided, each with a grooved drum and cable follower. The main hoist carries 797 feet of ¾-inch cable; the auxiliary hoist carries 436 feet of ¾-inch cable. Hook equipment consists of a 6.2-ton (5.6 metric ton) hook with swivel and a 75-ton (68.0 metric ton) seven-sheave hook block with swivel and safety latch, rated for ¾-inch (19 mm) wire rope.

Safety and monitoring systems are extensive. The crane is equipped with Tadano's AML-C electronic load moment indicator, an anti-two-block overwind cutout, a boom angle indicator, drum rotation indicators on both hoists (audio, visible, and thumper type), an outrigger extension length detector, and an electronic crane monitoring system. The Tadano twin swing system is fitted alongside a 360° positive swing lock, and control is via self-centering finger control levers with pilot control.

Outrigger equipment includes independently controlled outriggers with four extension positions and self-storing outrigger pads. Operator comfort and connectivity features include hot water cab heating, air conditioning, a hydraulic oil cooler, and a Tadano HELLO-NET telecommunications terminal for remote monitoring. A fuel consumption monitor and Eco mode system are also present.

The crane is listed in used condition and is available from Alberta, Canada.

This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.