Machine Photos
Capital Infusion
Machine Finance
Creditpath
Equipment Financing
Tesoma Gmbh Compact 12-E-I Stenters and Dryers
()- Listing No
- 1140746
- Year
- Manufacturer
- Tesoma
- Model
- Compact 12-E-I
- Condition
- Used
- Location
- Bulgaria
- Price
- POA
- Description
-
Manufacturer: TESOMA GmbH Model: COMPACT 12-E-IR Type: Continuous Dryer Belt Width: 1200 mm Feed End Width: 1260 mm Frame Width: 1750 mm Maximum Drying Temperature: 220°C Conveying Speed: 1-10 m/min Total Length: 5000 mm Connected Load: 52 kW Electrical Load: 49 kW Mains Connection: 400 V / 50 Hz Heating Method: Steam Condition: Visible Description: Optimize your drying processes with this compact continuous flow dryer, designed for high performance and enhanced energy efficiency thanks to its infrared electric heating system. Technical Specifications: Belt Widths: 1200 mm Belt Length: 10,100 mm Passage Height: 160 mm Feed End Height: 950 mm Feed End Length: 1000 mm Heating Zone Length: 3000 mm Delivery End Length: 1000 mm Total Height: 2030 mm Total Weight: 1250 kg Exhaust Air Connection Diameter: ND 250 mm Performance and Electrical Specifications: Maximum Solvent Feed Quantity: 8.4 kg/h Minimum Volumetric Exhaust Air Flow Rate: 1415 m³/h Adjustable Conveyor Speed: 1 – 10 m/min Motor Load: 3 kW Total Power Input: 79 A Power Supply: 400 V / 50 Hz / N / PE Power Cable Section: 35 mm²Cu (depending on system specifications)Manufacturer: TESOMA GmbH Model: COMPACT 12-E-IR Type: Continuous Dryer Belt Width: 1200 mm Feed End Width: 1260 mm Frame Width: 1750 mm Maximum Drying Temperature: 220°C Conveying Speed: 1-10 m/min Total Length: 5000 mm Connected Load: 52 kW Electrical Load: 49 kW Mains Connection: 400 V / 50 Hz Heating Method: Steam Condition: Visible Description: Optimize your drying processes with this compact continuous flow dryer, designed for high performance and enhanced energy efficiency thanks to its infrared electric heating system. Technical Specifications: Belt Widths: 1200 mm Belt Length: 10,100 mm Passage Height: 160 mm Feed End Height: 950 mm Feed End Length: 1000 mm Heating Zone Length: 3000 mm Delivery End Length: 1000 mm Total Height: 2030 mm Total Weight: 1250 kg Exhaust Air Connection Diameter: ND 250 mm Performance and Electrical Specifications: Maximum Solvent Feed Quantity: 8.4 kg/h Minimum Volumetric Exhaust Air Flow Rate: 1415 m³/h Adjustable Conveyor Speed: 1 – 10 m/min Motor Load: 3 kW Total Power Input: 79 A Power Supply: 400 V / 50 Hz / N / PE Power Cable Section: 35 mm²Cu (depending on system specifications)
About this machine
This used Tesoma Compact 12-E-IR is a continuous dryer — sometimes referred to as a conveyor dryer or through-feed dryer — a category of industrial drying equipment used to process materials in an uninterrupted flow as they pass through a heated chamber on a moving belt. Tesoma GmbH is a German manufacturer specialising in compact drying and curing systems, with their equipment widely used in textile finishing, screen printing, coating, and related industrial processes.
The machine is built around a 1,200 mm belt width, with a feed end width of 1,260 mm and an overall frame width of 1,750 mm. The belt itself runs to a total length of 10,100 mm, while the machine's overall footprint measures 5,000 mm in total length and 2,030 mm in total height. The passage height through the dryer is 160 mm, making it suited to flat or low-profile materials. Total machine weight is 1,250 kg.
Heating is delivered via an infrared electric system, achieving a maximum drying temperature of 220°C. The active heating zone spans 3,000 mm in length, flanked by a 1,000 mm feed end and a 1,000 mm delivery end. Conveyor speed is continuously adjustable between 1 and 10 m/min, allowing operators to tune dwell time to the specific material and drying requirement.
On the electrical side, the machine draws a connected load of 52 kW and an electrical load of 49 kW, with a motor load of 3 kW. Total power input is rated at 79 A, supplied via a 400 V / 50 Hz / N / PE mains connection. The recommended power cable cross-section is 35 mm² copper, though this may vary depending on the installation. The machine handles a maximum solvent feed quantity of 8.4 kg/h and requires a minimum volumetric exhaust air flow rate of 1,415 m³/h, with the exhaust air connection dimensioned at ND 250 mm.
The machine is located in Bulgaria and is offered in used, visible condition.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
