Roadtec Cold Milling
Roadtec cold milling machines, including popular models like the RX series, are widely used for precise asphalt removal on roads, highways, and airport runways. When buying used, inspect overall machine condition, engine hours, cutting drum wear, and conveyor belt integrity to ensure reliable performance.
2013 - Roadtec RX-600E Cold Milling()
Used Roadtec RX-600e Cold Planer for sale Hours: 5,221 (ECM was replaced at 2,025 Hours) Maximum cut depth: 13” (330 mm) Standard tooth spacing: 5/8” (16mm) Standard tip diameter: 44” (1,118 mm)
673982 Machineryline https://machinelista.com/machine/roadtec-rx-600e-cold-milling/
2018 - Roadtec RX700E Cold Milling()
2018 ROADTEC RX-700e MILLING MACHINE. CALL FOR MORE INFORMATION IF NEEDED
441549 Machinerytrader https://machinelista.com/machine/roadtec-rx700e-cold-milling-4/
2019 - Roadtec RX700E Cold Milling()
Caterpillar C18 engine rated at 800 hp Tier 4F Engine Load Control Automatic Traction Control Front, Rear, Crab and Coordinated Steer Direct Hydraulic Planetary Track Drives Foot per minute meter High Pressure ..... read more
441516 Machinerytrader https://machinelista.com/machine/roadtec-rx700e-cold-milling-3/
2010 - Roadtec RX700 Cold Milling()
7 ft Cutting Width, 8 in Milling Depth, Water System, 36 in Discharge Conveyor, 14 in Triple Grouser Track Shoes w/Rubber Inserts
441448 Machinerytrader https://machinelista.com/machine/roadtec-rx700-cold-milling-6/
2011 - Roadtec RX700 Cold Milling()
2011 Roadtec RX700 3 Track. 91" Drum. Multiple units. Located CO. $69,500
441384 Machinerytrader https://machinelista.com/machine/roadtec-rx700-cold-milling-4/
2012 - Roadtec RX700 Cold Milling()
2012 Roadtec RX-700-4 Asphalt Milling Machine, Caterpillar C18 Diesel Engine (700 HP), 2,614 Hours, 7' Cutting Width, 14" Milling Depth, 25' Discharge Conveyor Belt, (4) 5' Track Pads, (2) MMC-2000 Leveling Con ..... read more
441349 Machinerytrader https://machinelista.com/machine/roadtec-rx700-cold-milling-3/
2017 - Roadtec RX600E-4 Cold Milling()
2017 Roadtec RX600E-4 Cold Planer / Milling Machine, Cummins QSX-15 675 HP Engine, 200 Hours
441327 Machinerytrader https://machinelista.com/machine/roadtec-rx600e-4-cold-milling-2/
2018 - Roadtec RX300E Cold Milling()
Roadtec RX-300 mill with 48" standard drum (5/8" spacing), Guardian telematics, and ACE Base system. Cummins QSL9 engine.
440934 Machinerytrader https://machinelista.com/machine/roadtec-rx300e-cold-milling-2/
2018 - Roadtec RX100E Cold Milling()
15,840 lbs, 130 HP @ 2,100 RPM, 4' 8" Width; 12' 8" Length, 20" drum width, 8" Cut Depth, 55 gal fuel capacity, 155 gal water capacity. Includes MOBA grade controls.
440829 Machinerytrader https://machinelista.com/machine/roadtec-rx100e-cold-milling/
2020 - Roadtec RX505E Cold Milling()
600HP 4-TRACK TIER 4F CUMMINS OSX-15 ENGINE | 24V LED NIGHT LIGHT PACKAGE | GUARDIAN REMOTE TELEMATICS | ACE GRADE AND SLOPE AUTOMATION W/ AUTOCUT | PREWIRED FOR ACE AVERAGING SKI | 6'7" (79") KENNAMETAL SINGLE ..... read more
436955 Machinerytrader https://machinelista.com/machine/roadtec-rx505e-cold-milling/
