This Atlas Copco Flexiroc T50 is a used vertical drill — sometimes referred to as a surface drill rig or top hammer drill — a type of machine designed for surface drilling applications such as quarrying, mining, and construction, where holes are drilled vertically or at a defined angle into rock or hard ground. Atlas Copco is a well-established Swedish industrial manufacturer with a long history of producing compressed air, power, and drilling equipment for the mining, quarrying, and construction industries worldwide.
Power comes from a Caterpillar C9 Tier 4 engine, and the machine's compressor delivers 492 CFM at 152 PSI, providing the air volume and pressure required for efficient percussive drilling operations. The drifter unit is a COP 3060ME, and the rig is configured for GT60 drill string tooling. The engine has accumulated 5,245 hours of recorded use.
The service history documented in this listing reflects consistent mechanical attention over the machine's life. The COP 3060ME drifter was rebuilt at 4,909 hours, extending the service life of one of the rig's most critical wear components. A new feed motor was installed at 4,100 hours, and both the feed chain and hose reel sprockets were replaced at 4,000 hours. At 3,962 hours, the complete air conditioning system was replaced and the engine serpentine belt was renewed at the same time.
This 2014 machine is located in Kentucky, USA, and is offered for $117,500.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.