This 2023 DAF CF430 is a used hook lift truck — also referred to as a roll-off truck — designed to carry, load, and unload demountable containers and skips by means of a hydraulic hook arm system. DAF is a well-established Dutch commercial vehicle manufacturer with a long history of producing heavy trucks for transport, construction, waste management, and infrastructure industries. This particular example is located in the Netherlands and is presented in very good general, technical, and visual condition.
The truck rides on a four-axle configuration. The front axle runs 385/55 22.5 tyres and steers, with a maximum axle load of 9,000 kg. The first and third rear axles are also steering axles, fitted with 385/55 22.5 tyres and rated to 8,000 kg and 7,500 kg respectively. The second rear axle — the driven axle — runs wider 315/70 22.5 tyres in a twin-wheel configuration, is equipped with a differential lock, and carries a maximum axle load of 11,500 kg with single reduction. This liftable and steering rear axle arrangement improves manoeuvrability and allows axle load optimisation depending on the payload. The six-cylinder engine meets Euro 6 emissions standards and is fitted with a power take-off (PTO) to drive the hydraulic equipment. The day cab seats two, has two doors, electrically operated windows, a roof hatch, a sun visor, cruise control, a radio/CD player, and a reversing camera. Safety systems include ABS and EBS. The truck rides on rear air suspension and is fitted with a 40 mm coupling, warning lights, and a toolbox. The Dutch APK roadworthiness certificate was valid until February 2025. The empty weight is 16,202 kg and the rated carrying capacity is 19,798 kg. Overall dimensions are 980 × 250 × 380 cm (L × W × H).
The hook lift system is a VDL type S-25-6200, rated at 25 tonnes, with a system length of 620 cm. The hook height is adjustable. Two Multifaster hydraulic connections are mounted at the rear of the chassis, an extendable rear bumper is fitted, and a stainless steel storage box is included.
Mounted behind the cab is an HMF 2820K RCS loader crane manufactured in 2022. It is a 28 tonne-metre unit with three stages of hydraulic extension, fifth and sixth hydraulic functions, a rotator, and an oil cooler. The crane is operated via radio remote control. Its lifting capacity at rated reach is as follows: 3,940 kg at 6.3 metres, 2,960 kg at 8.2 metres, and 2,370 kg at 10.2 metres. The crane is mounted on a high subframe plateau, and a high-level platform is fitted to the installation.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.