Machine Photos
Lexington
Equipment Financing
Currency Finance
Finance Solutions
Eigenbau Mavo 5T-20 Workshop Press
()- Listing No
- 933237
- Year
- Manufacturer
- Eigenbau Mavo
- Model
- 5T-20
- Condition
- Used
- Location
- Germany
- Price
- POA
- Description
-
Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Ds A Ealswki Apjyyjkg Weight: 485 kg The listing was translated automatically. Translation errors are possible. Request more information Request more information Already requested
About this machine
This Eigenbau Mavo 5T-20 is a used hydraulic workshop press — sometimes referred to as a hydraulic shop press or arbor press — designed primarily for broaching keyways in through holes, though capable of a wide range of pressing, punching, and assembly tasks. The machine is located in Germany and is offered in used condition.
At the heart of the press is a hydraulic system delivering a maximum press force of 5 tonnes at 100 bar working pressure. The hydraulic unit is a HAWE pump, type K5/3, which is rated to supply up to 400 bar, though the seller notes it operates at a notably high noise level. The drive motor is rated at 5.5 kW and runs on a 400-volt, 50 Hz three-phase supply. The downward ram travels at approximately 11.5 mm per second, covering the full 220 mm cylinder stroke in around 19 seconds; the return stroke is faster at approximately 24.5 mm per second, completing the same travel in around 9 seconds.
The frame is constructed from 140 mm double I-beam steel, giving the machine a robust, heavy-duty structure that the seller estimates capable of withstanding static loads of 40 tonnes or more. The column width is 770 mm, and the maximum distance from the threaded piston rod to the table crosshead is 900 mm. The piston rod carries an M42 x 1.5 mm external thread, enabling the use of screw-in extensions and tooling adaptors. Two screw-in extensions are included — one of approximately 290 mm and one of approximately 250 mm, both with M42 x 1.5 mm internal thread — along with two ram extensions measuring 110 mm and 130 mm respectively for insertion into those extensions, and two support plates. The press is operated via a two-hand control panel with two buttons for the downward stroke and one button for the return stroke.
The machine's overall footprint is 1,200 mm long by 930 mm wide by 2,280 mm high, and it weighs 485 kg. Despite its mass, it is mobile via pallet truck, which facilitates repositioning within a workshop environment.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
