2019 - Engel DUO 2400 650 Injection Moulding

• Listing No
• 1151369
• Year
• 2019
• Manufacturer
• Engel
• Model
• DUO 2400 650
• Condition
• Used
• Location
• Germany
• Price
• $N/A
• Description
• This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Location: DE Control Brand: ENGEL Screw Diameter: 60 mm Oil Reservoir Capacity - Injection Unit: 500 l Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool Water Consumption (32°C): 4.80 m3/h Maximum injection capacity: 890 cm³ Screw torque: 2000 nm // maximum screw speed @ reduced torque: 275 min-1 Reduced torque @ maximum screw speed: 1600 nm Recovery rate (3-zone screw): 51 g/s // recovery rate (barrier screw): 67. 1 g/s Injection rate: 353 cm³/s Nozzle stroke: 950 mm Ld ratio: 24. 0 Heating zones incl. Nozzle: 8 // heating wattage: 27. 5 kwel Opening force with pressure pad: 510 kn Maximum distance between platens: 1750 mm Drop Out Chute Width: 1100 mm Weight of Clamping Unit: 20,000 kg Maximum Mold Weight (Moving Platen): 7,330 kg Maximum Mold Weight (Stationary Platen): 7,330 kg Maximum Mold Weight (Total): 11,000 kg Stroke: 700 mm Dry Cycle Time: 2.9 s Control System: Monocompute CC300 Screen languages: German, English Power Control: optimizes motor performance during dispensing IQ Weight Monitor: monitors shot weight & viscosity IQ Weight Control: automatic injection parameter adjustment during fluctuations FAP: smallest possible platen opening, spherical calotte minimized BAP: without ejector opening Mold heating: 16 circuits, max. 40 kW heat output (Euromap 14) Temperature control unit interface: Engel protocol, 20 mA current loop Hose specification: max. 90 °C / 4 bar Supply voltage: 3×400 V + N + PE / 50 Hz Potential-free contacts: 4 inputs / 4 outputs (freely programmable) Operating instructions: printed + CD (German) Paint finish: RAL 9002 (gray-white) & RAL 5002 (ultramarine blue), special ENGEL design Additional equipment Machine Benefits Qualitative Machine Benefits The machine has electric water batteries (4 e-flomos with 8 circuits each) The injection units are fitted with accumulators which enable a high injection pressure of up to 2400 bar with a 60 mm screw Technical Machine Benefits Extra Information Dimensions & Weight Cycle Data (Euromap 6) Main Features 21.5” full HD touchscreen USB interface / Ethernet connection E-move control element 3 keycards for user login Graphic symbols for cycle control Acoustic error signal / Signal light for error display Programs & Monitoring Mould parallelism measurement Quality monitoring interface (injection time dosing time pressure cycle time) Continuous ejection possible when monitoring is deactivated Clamping Unit & Plates Reinforced clamping plates (FAP & BAP +50 mm each) Reduced min./max. tool height and panel distance (–100 mm due to reinforcement) Additional threads according to EUROMAP VOL1 Centering grooves according to drawing Plate ejector – Variant A (adapted to clamping pattern) Safety interface for ejector Hydraulics & Core Pulls Hydraulic core pull 1-fold on moving platen 2-fold on fixed platen 2-fold on moving platen with PQ proportional valve volume measurement pressure/speed adjustment Interface for intermediate core pull position Mold Heating & Cooling Temperature monitoring interface (moving & fixed platen) 4-fold hydraulic mold nozzle control Separate cooling water connection (tool & machine) 4-way flow regulator (0–10 l/min) Hoses for mold cooling 4 temperature control circuits at rear of machine Rinsing nozzle with hose clamp 2× ENGEL e-formo temperature control systems (1–15 l/min 8 circuits max. 120 °C) 1 distributor for fixed plate 1 for movable plate Additional e-formo unit on operating side (optional) Drive & Hydraulics ENGEL ecodrive S+V3 (speed-controlled servo drive) Closed control system for pressure & speed (closed loop) 2× 50 L hydraulic accumulators (for spraying process) Battery position at the front (as per drawing) Oil cooler (standard capacity) Supplied without oil filling (oil contains zinc during commissioning) Quiet energy-efficient hydraulics with optimized control filtration oil preheating & cooling Injection Unit Bi-metallic cylinder (Fe-based) abrasion & corrosion resistant up to 350 °C Additional zone heating on barrel Thrust washer (diaphragm) for screw S8 Ø 60 mm L/D 24 geometry G1 UNR9 RGB non-return valve (powder metallurgical chrome steel) Corrosion-resistant flange Special open nozzle corrosion-resistant flange thread V445x3 radius 15 mm bore 8 mm Nozzle outlet suitable for hot runner connection 230 V cylinder & nozzle heating Ceramic cylinder covers Insulated heating areas (not suitable for PC PMMA PVC etc.) Electrical System Schuko sockets (230 V) max. 2 pcs 3-phase CEE socket (10/16 A) Interfaces (Euromap) 13 – Core pull end positions 14 – Heating 63 – Online data access 65 – Tank calculation Robot & Accessories ENGEL easix robot (KR 60 special version) Robot control unit not integrated multiple times Assembly & test at ENGEL Compliance Design & Extras EN 201 conformity (machine safety) E-connect.24 basic package (remote maintenance) Machine feet (standard version) Labeling in German All 4 E-Flomo units completely renewed by ENGEL Show the whole comment
  Injection MoldingEngel