Machine Photos
Clearwater
Equipment Finance
Capital Infusion
Machine Finance
2018 - Faccin 4HEL 3590 Bending & Forming
()- Listing No
- 950809
- Year
- 2018
- Manufacturer
- Faccin
- Model
- 4HEL 3590
- Condition
- Used
- Location
- Netherlands
- Price
- POA
- Description
-
Type: 4HEL 3590 Besturing: Siemens TOUCH Wals breedte: 3500 mm Plaatdikte bij product 3x bovenrol Ø: 80 mm Plaatdikte bij product 5x bovenrol Ø: 110 mm Plaatdikte bij aanbuiging: 90 mm Onderrol Ø: 800 mm Zijrol Ø: 600 mm Aantal rollen: 4 Wals snelheid: 0-6 Verstelling onderrol: 0-200 mm/min Verstelling zijrollen: 0-400 mm/min Top support: yes Zij supports: yes Aantal aangedreven rollen: 2 Vermogen kW: 90+75+9 kW
About this machine
This Faccin 4HEL 3590 is a used four-roll plate bending and forming machine, sometimes referred to as a plate roller or roll bender, built in 2018 and currently located in the Netherlands. Plate bending machines of this type are used to form metal sheet and plate into cylindrical, conical, and curved profiles, and are widely employed in industries such as pressure vessel fabrication, structural steelwork, shipbuilding, and general metal fabrication. Faccin is an Italian manufacturer with a long-standing reputation for producing plate rolling and bending equipment serving heavy industrial and precision metalworking sectors.
The machine operates with four rolls in total, two of which are driven, giving it the characteristic four-roll configuration that allows pre-bending and rolling in a single pass without repositioning the plate. Rolling width is 3,500 mm, making it suitable for wide plate work. The top roll diameter is referenced in relation to plate capacity: at three times the top roll diameter the capacity is 80 mm plate thickness, and at five times the top roll diameter it reaches 110 mm, while the pre-bending capacity stands at 90 mm. The bottom roll has a diameter of 800 mm and the side rolls each measure 600 mm in diameter.
Rolling speed is variable between 0 and 6 m/min. The bottom roll adjustment speed runs from 0 to 200 mm/min, while the side rolls can be adjusted at speeds of 0 to 400 mm/min, allowing precise control over the forming process. Total installed power amounts to 174 kW, distributed across three motors rated at 90 kW, 75 kW, and 9 kW respectively.
The machine is equipped with a Siemens Touch control system, providing an operator-friendly interface for managing roll positions and forming parameters. It also features a top support and side supports, which aid in handling and guiding large or heavy plate sections during the rolling cycle. The machine is offered in used condition.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
