This Manitou MLT 625 is a telehandler — sometimes referred to as a telescopic handler or teleporter — a versatile materials-handling machine used across agriculture, construction, and logistics to lift, place, and transport loads at height and reach with a extending boom arm. Manitou is a well-established French manufacturer with decades of experience building telehandlers, rough-terrain forklifts, and related lifting equipment for demanding industrial and agricultural environments worldwide.
This 2024 machine is offered used and is located in Germany. It carries a maximum rated lift capacity of 2,500 kg and a lift height of 5.85 m, with a maximum lateral reach of 3.30 m and a reach of 0.50 m at maximum lift height. Breakout force with the bucket attachment is rated at 4,205 daN. The front overhang measures 0.99 m, the dump angle is 117°, and the tilt angle is 12°.
Power comes from a Kubota Stage V-compliant engine, model V3307-CR-T-E5B, a four-cylinder unit displacing 3,331 cm³. It produces 75 hp (55.40 kW) and a maximum torque of 265 Nm. The engine meets Stage V emissions standards. Cooling is handled by a dual-water-radiator system supplemented by hydraulic oil cooling, and a standard spiral fan is fitted. The fuel tank holds 63 litres.
Drive is transmitted through a hydrostatic transmission with two forward and two reverse gear ranges, giving a maximum travel speed of 25 km/h. All four wheels are both driven and steered, providing a tight turning radius of 3.31 m (measured over the tyres). The front axle is fitted with a locking differential, and the parking brake is an automatic negative type with oil-bath multi-disc brakes on the front axles.
The hydraulic system uses a gear pump delivering 86 litres per minute at a maximum pressure of 235 bar. Boom cycle times are as follows: raise 7.30 seconds, lower 4.95 seconds, telescope out 5.20 seconds, telescope in 3.70 seconds, crowd 3.20 seconds, and dump 3.20 seconds. Controls are operated via a JSM joystick system.
The cab holds ROPS and FOPS Level 1 certification. Measured cabin sound level (LpA) is 76 dB, with an ambient sound power level (LwA) of 104 dB, both assessed in accordance with standard NF EN 12053. Hand-arm vibration is rated at below 2.50 m/s². The machine carries internal stock reference g06435.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.