Machine Photos
Al Omaniya
Equipment Finance
Lexington
Equipment Financing
2025 - Maxus Backhoe Loader 3CX Maxus Backhoe
- Listing No
- 794225
- Year
- 2025
- Manufacturer
- Maxus
- Model
- Backhoe Loader
- Condition
- Used
- Location
- Poland
- Price
- €32,340
- Description
- ENGINE Latest Generation Engine Turbocharged Diesel Direct Injection Paper Air Filter Water-Cooled The 4-cylinder engine enhances: Torque Retention Maximum Torque Torque at 1000 RPM Emission standards compliant with Euro regulations Reduced Noise Emissions Specifications Model Year: 2025 Total Operating Weight: 8000 kg Dimensions (L × W × H): 7600 × 2260 × 2890 mm Wheelbase: 2250 mm Minimum Ground Clearance: 300 mm Loading Bucket Capacity: 1.5 m³ Initial Weight: 2800 kg Excavator Bucket Capacity: 0.3 m³ Maximum Digging Depth: 4100 mm Engine Power: 76 kW (102 HP) Tires: 14-17.5 / 19.5L-24 Service Brake: External Disc Brake Axle: FEICHENG Bucket Width: 60 cm Performance Rated Speed: 2400 r/min Steering Angle: ±36° Hydraulic System Minimum Turning Radius: 6581 mm Excavator Grab Digging Force: 46.5 KN System Pressure: 16 MPa Dipper Digging Force: 31 KN Bucket Lift Time: 6.8 s Bucket Lowering Time: 3.1 s Bucket Unloading Time: 2.0 s If you need a different tractor or machine, any power level is available. Simply ask your question, and you’ll receive a prompt response!
About this machine
This is a backhoe loader—a compact, wheeled earthmoving machine that combines front-end loading and rear excavation capabilities. Backhoe loaders are used extensively in construction, landscaping, utilities, and civil works for material handling, trenching, digging, and site preparation. The 2025 Maxus 3CX model offers the versatility typical of the category in a single, operator-friendly platform.
The machine is powered by a latest-generation turbocharged diesel engine with direct injection and water cooling. The four-cylinder unit produces 76 kW (102 horsepower) at a rated speed of 2400 revolutions per minute and is engineered for torque retention and peak torque delivery. The engine complies with Euro emission standards and features reduced noise emissions, with a paper air filter as standard.
Dimensionally, the backhoe loader measures 7600 mm in length, 2260 mm in width, and 2890 mm in height, with a wheelbase of 2250 mm and a minimum ground clearance of 300 mm. The operating weight is 8000 kg. The front loading bucket has a 1.5 m³ capacity and an initial weight of 2800 kg, while the rear excavator bucket holds 0.3 m³. The loader bucket is 60 cm wide. The excavator arm achieves a maximum digging depth of 4100 mm.
The hydraulic system operates at 16 MPa system pressure. The loader bucket generates a lifting force sufficient to handle its rated capacity, with a cycle time of 6.8 seconds for lifting, 3.1 seconds for lowering, and 2.0 seconds for unloading. The excavator arm delivers a digging force of 46.5 kilonewtons through the grab and 31 kilonewtons through the dipper bucket.
Mobility is supported by an external disc service brake, FEICHENG axle, and a steering angle of ±36 degrees, producing a minimum turning radius of 6581 mm. Tyres are specified as 14-17.5 / 19.5L-24. This 2025 model is located in Poland and carries a used classification.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
