A Mercedes 6x4 concrete pump is a truck-mounted pumping system designed to deliver ready-mix concrete to construction sites. Concrete pumps are essential equipment in building and civil engineering work, allowing concrete to be transported vertically and horizontally from the truck to the point of placement, reaching areas that would be difficult or impossible to access by standard discharge chutes.
This unit is fitted with a Sermac SCL120 – 5Z32 concrete pump arm, a five-section boom capable of a maximum reach of 32 metres. The delivery tube diameter is 120 mm. The pump is equipped with a radio remote control, allowing the operator to manage placement from a distance. The machine was manufactured in 2003.
The chassis is a six-wheel-drive Mercedes truck in Euro 3 specification, featuring a day cabin with right-hand drive configuration. It is powered by a manual gearbox and equipped with differential lock and full steel/spring suspension. The fuel tank capacity is 210 litres. The chassis height is 105 cm. The wheelbase is 390 cm between the first and second axles, and 135 cm between the second and third axles. An analogue tachograph is fitted.
Tyre specifications are as follows: front axle 315/80 R22.5 (tread depth 40 per cent on the left, 95 per cent on the right); rear axle one 295/80 R22.5 (tread depth 80 per cent outer left, 90 per cent outer right); rear axle two 295/80 R22.5 (tread depth 75 per cent on both outer sides). The vehicle carries UK registration (RX53PH) and requires customs clearance for international movement.
Shipment dimensions are 970 × 250 × 400 cm. The total length is approximately 10 metres, with an overall width of 3 metres and height of 4 metres. The vehicle identification number is WDB9536432K837215. The unit is located in the Netherlands and is presented in used condition.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.