Machine Photos
Al Omaniya
Equipment Finance
Capital Infusion
Machine Finance
2023 - Patriot P1 Vertical Drill
()- Listing No
- 494043
- Year
- 2023
- Manufacturer
- Patriot
- Model
- P1
- Condition
- Used
- Location
- USA
- Price
- POA
- Description
-
2023 FREIGHTLINER M2-106 CHASSIS 6X4VIN:1FVHCYFE3PHNR2537/2023 DRILL S/N:1240224ENGINE S/N: 74993904/ CUMMINS L9P1 DRILL RIG SPECIFICATIONSTORQUE: 50,000 FT/LBS. CROWD: 25,000 LBSKELLY TYPE: ROUND INTERLOCKING-(BAR 1) 10 & 3/4"| WALL THICKNESS 3/8"-(BAR 2) 7 & 5/8"| WALL THICKNESS 1/2"-(BAR 3) 5 & 1/2"| WALL THICKNESS 1/2"STUB: 4" WITH HOLEDRILL DIAMETER & DEPTH: 8 FEET DRILL DIAMETER35 FEET DRILL DEPTHDRILL SPEEDS: DRILL RPM 12-73| SPINOFF RPM 120MAIN WINCH: DINAMIC OIL 18,000 LBSLINE SPEED 160 FRMAUX WINCH: DINAMIC OIL 8,000 LBSSLIDE: 32" SLIDE OFF REARENGINE: CAT C4.4| 188HPHYDRAULIC & FUEL TANK: (HYDRAULIC) 95 GALLONS(FUEL) 65 GALLONMAST: SECTIONAL MAST(WITH 3 AVAILABLE CONFIGURATIONS)-DELIVERED WITH 25' OPERATIONAL HEIGHTTILT: 10 DEGREESWEIGHT: (FRONT) 15,042 LBS|(REAR) 33,239 LBSPAINT COLORS:-BASE| RAL 9005 JET BLACK-BODY & SLIDEBASE| RAL 9016 TRAFFIC WHITE-MAST| RAL 7015 SLATE GREYDICA OUTRIGGER PADS & STORAGESERVPROMOUNTED TOOLBOX
About this machine
This Patriot P1 is a vertical drill — also referred to as a foundation drill or auger drill rig — a category of machine used to bore large-diameter holes into the ground for foundation piers, caissons, and deep anchor installations. Patriot builds purpose-engineered drilling equipment for the construction and foundation industry, and this example is a 2023 model in used condition, currently located in Florida, USA.
The drill rig is mounted on a 2023 Freightliner M2-106 chassis configured in a 6×4 axle arrangement, with VIN 1FVHCYFE3PHNR2537. The rig itself carries serial number 1240224. Power for the drilling system is provided by a Cummins L9 engine (engine serial number ), while the carrier chassis is powered by a CAT C4.4 producing 188 horsepower. The hydraulic system is fed from a 95-gallon hydraulic tank, and the fuel tank holds 65 gallons.
The drilling specifications are substantial. Rotary torque is rated at 50,000 ft/lbs, with a crowd force of 25,000 lbs. The rig accommodates a round interlocking kelly bar system comprising three sections: Bar 1 measures 10¾ inches with a 3/8-inch wall thickness, Bar 2 measures 7⅝ inches with a 1/2-inch wall thickness, and Bar 3 measures 5½ inches with a 1/2-inch wall thickness. The stub is 4 inches with a hole. Maximum drill diameter is 8 feet, and maximum drill depth is 35 feet. Drill rotation speeds range from 12 to 73 RPM, with a spinoff speed of 120 RPM.
The main winch is a Dinamic Oil unit rated at 18,000 lbs with a line speed of 160 feet per minute. An auxiliary winch, also by Dinamic Oil, is rated at 8,000 lbs. The rig features a 32-inch slide off the rear. The mast is a sectional design offering three available configurations and is delivered at a 25-foot operational height, with a 10-degree tilt capability.
Gross weights are documented at 15,042 lbs on the front axle and 33,239 lbs on the rear axle. The paint scheme follows RAL standards: the base is finished in RAL 9005 Jet Black, the body and slide base in RAL 9016 Traffic White, and the mast in RAL 7015 Slate Grey. The machine is equipped with DICA outrigger pads with storage and a Servpro-mounted toolbox.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
