Machine Photos
Capital Infusion
Machine Finance
Al Omaniya
Equipment Finance
2001 - PM 20 Mounted Knuckle Boom Crane
()- Listing No
- 490572
- Year
- 2001
- Manufacturer
- PM
- Model
- Condition
- Used
- Location
- USA
- Price
- POA
- Description
-
Original miles! Very low use truck, 371 PTO hours, Pre-emission, Allison Automatic, DT530 @ 275hp, PM20 (Model: 20025) knuckle boom with remote control, 46 ft horizontal reach, 19,840 lbs capacity, 4 outriggers, 18 ft flatbed, (2) 5 ft toolboxes, ladder, pintle hitch with both trailer plugs, back up camera, double frame, all tires are like new virgin tires, 5.29 ratio, cruise control, engine brake 21,995 miles and 2,543 hours - ECM verified 14,770 lbs @7'5" 5,400 lbs @20'6" 2,000 lbs @45'
About this machine
This 2001 PM 20 Mounted Knuckle Boom Crane is a mounted knuckle boom crane — sometimes referred to as a picker truck or loader crane — designed to lift and place heavy loads from a vehicle-mounted platform. This type of equipment is widely used in construction, utility work, landscaping, and material handling where a self-contained lifting solution is needed on a truck chassis. PM is a well-established Italian manufacturer of knuckle boom cranes with a long history of supplying lifting equipment to construction and infrastructure markets worldwide.
The crane is identified as the PM20 Model 20025 and is equipped with a remote control for operator convenience. It delivers a horizontal reach of 46 feet and a rated capacity of 19,840 pounds, with detailed load ratings verified from the machine: 14,770 lbs at 7 feet 5 inches, 5,400 lbs at 20 feet 6 inches, and 2,000 lbs at 45 feet. Four outriggers provide the stability base required for safe lifting operations across the full working envelope.
The truck chassis supporting the crane is equally well-specified. Power comes from an International DT530 engine rated at 275 horsepower, paired with an Allison automatic transmission. It is a pre-emission configuration. Drivetrain gearing is set at a 5.29 ratio, and the truck includes cruise control and an engine brake. The PTO, which drives the crane, shows just 371 hours of recorded use, and the chassis odometer reads 21,995 miles — both figures ECM-verified — indicating genuinely low utilization for a 2001 machine.
The flatbed body measures 18 feet and is complemented by two 5-foot toolboxes, a ladder, and a pintle hitch fitted with both trailer plug types. A backup camera is installed. The frame is a double-frame build for added structural rigidity. All tires are described as like-new virgin condition. The unit is located in Wisconsin, USA.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
