Machine Photos
Capital Infusion
Machine Finance
BusinessLoans
Business Loans
1995 - Sandretto 430-120 Serie Injection Moulding
()- Listing No
- 1153538
- Year
- 1995
- Manufacturer
- Sandretto
- Model
- 430-120 Serie
- Condition
- Used
- Location
- Portugal
- Price
- POA
- Description
-
Clamping force: 1,000 kN (equivalent to 120 tons) Closing force: 1 300 kN (130 t) Closing force (clamping force): 1,000 kN (equivalent to 120 tons) Closing force (clamping force): 1,000 kN (equivalent to 120 tons) CNC control: SeLogica Column spacing: 1120 × 1120 mm Ejector: 130 mm stroke with 34.5 kN force Ejector: 130 mm stroke with 34.5 kN force Estimated injection volume: 6220 cm³ (approximately 6.2 L) Injection pressure: Up to 2,500 bar Injection volume: 139 cm³ Installed power: 18,5 kW Installed power: 18,5 kW Maximum opening stroke (Max. Opening): 870 mm Maximum opening stroke (Max. Opening): 870 mm Minimum mold height: 275 mm Mold thickness (min./max.): 100 / 460 mm Mold thickness (min./max.): 100 / 460 mm Opening Stroke: 575 mm Possible extras: Euromap-12, robotics, hot-runner, etc. Pump motor power: 48 kW Robotic connection: Euromap-12 interface available screw diameter: 35mm (some 40mm or 50mm) Shot weight (PS): 117–166 g Spacing between columns (tie-bar): 415 × 415 mm Spacing between columns (tie-bar): 415 × 415 mm Stroke volume: 286 cm³ (for PS – polystyrene) Stroke volume: 286 cm³ (for PS – polystyrene) Tie-bar spacing: 470 × 470 mm Total installed power: 158 kW Weight: 4500 kg SANDRETTO EUROMAP 430-120 Series Otto 120 4.5Tn year 1995 Note: There may be differences between the data presented and the actual values. You must confirm the characteristics by visiting the equipment. Show the whole comment
About this machine
This Sandretto 430-120 Serie is a used injection moulding machine — sometimes referred to as an injection moulder or plastics injection press — built for the high-pressure forming of plastic components by injecting molten material into a closed mould cavity. Sandretto is a well-established Italian manufacturer with a long history of producing injection moulding equipment for the plastics processing industry, serving sectors ranging from automotive and packaging to consumer goods and technical components.
Manufactured in 1995 and currently located in Portugal, this machine is offered in used condition. It carries a clamping force of 1,000 kN (approximately 120 tonnes) and a closing force of 1,300 kN (130 tonnes). The platen configuration accommodates moulds with a minimum height of 275 mm and a mould thickness range of 100 to 460 mm. The tie-bar spacing is 415 × 415 mm, with a column spacing of 1,120 × 1,120 mm providing the broader structural envelope. The opening stroke runs to 575 mm, with a maximum opening of 870 mm.
On the injection side, the machine operates with a screw diameter of 35 mm as standard, with 40 mm and 50 mm screws also referenced. Injection volume is 139 cm³, with a stroke volume of 286 cm³ for polystyrene, and an estimated injection volume of 6,220 cm³ (approximately 6.2 litres). Shot weight for PS falls in the range of 117 to 166 g. Injection pressure reaches up to 2,500 bar. The ejector delivers a stroke of 130 mm with a force of 34.5 kN.
The machine is controlled by a SeLogica CNC system, a Sandretto proprietary control platform widely associated with this manufacturer's equipment. Installed power is rated at 18.5 kW, the pump motor at 48 kW, and total installed power at 158 kW. Machine weight is approximately 4,500 kg. A Euromap-12 interface is available, enabling connection of robotic handling systems, and the seller notes that provisions for hot-runner systems and robotics may also be possible.
As noted by the seller, there may be discrepancies between the data presented and the actual values of this specific unit, and the characteristics should be confirmed by a physical inspection of the equipment.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
