Machine Photos
Lexington
Equipment Financing
BusinessLoans
Business Loans
2007 - Kraussmaffei KM 250-1900 C1 Injection Molding()
- Listing No
- 1222441
- Year
- 2007
- Manufacturer
- Kraussmaffei
- Model
- KM 250-1900 C1
- Condition
- Used
- Location
- Poland
- Price
- POA
- Description
-
Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Fj A Eoxak Ucjalyhjfw Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m The listing was translated automatically. Translation errors are possible. Request more information Request more information Already requested
About this machine
This Kraussmaffei KM C1 is a used injection molding machine — sometimes referred to as an injection moulding machine or plastics injection press — manufactured in 2007 and currently located in Poland. Injection molding machines are used to produce plastic components by injecting molten material under high pressure into a mould cavity, and are found across a wide range of industries including automotive, consumer goods, packaging, and electronics. Kraussmaffei is a well-established German manufacturer with a long history of producing injection molding machinery, reaction process machinery, and extrusion systems for industrial plastics processing.
The clamping unit is fully hydraulic, delivering a clamping force of 2,500 kN and an opening force of 160 kN. Platen movement forces are 86 kN for opening and 68 kN for closing. The platen dimensions measure 995 × 1,050 mm, with a tie bar spacing of 630 × 630 mm. The mould open stroke is 820 mm, the minimum mould height is 330 mm, and the maximum opening width is 1,150 mm. The ejector provides a stroke of 200 mm and a force of 58/28 kN.
The injection unit is fitted with a 70 mm screw, capable of generating an injection pressure of 1,778 bar. Shot volume stands at 1,047 cm³, with a shot weight of 953 g (measured in polystyrene). Screw speed is selectable between 218 and 306 rpm, and the injection rate reaches 400 cm³/s. Throughput in polystyrene is rated at 75 g/s in standard mode and 105 g/s in high-speed mode.
The electro-hydraulic system is powered by a 55 kW pump motor, with barrel heating provided by six zones totalling 30 kW. The hydraulic oil tank has a capacity of 720 litres. Dry cycle performance, measured according to Euromap standards, is rated at 1,400 cycles per hour.
The machine is controlled by a Kraussmaffei MC4 system, featuring a colour monitor, operator panel, and floppy disk drive. Overall dimensions are 6.21 m long, 2.04 m wide, and 2.38 m tall, with a net weight of 14.2 tonnes including the control cabinet. The machine is offered in used condition from a seller based in Poland.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
