Machine Photos
Wiseman Finance
Asset Finance
Business Funding Now
Credit Lines
2015 - Sumitomo SHI Demag Systec SP 350 Injection Moulding
()- Listing No
- 1151389
- Year
- 2015
- Manufacturer
- Sumitomo
- Model
- Systec SP 350
- Condition
- Used
- Location
- Germany
- Price
- POA
- Description
-
This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Location: DE Screw Diameter: 45 mm Mould height min: 350 mm / mould height max: 745 mm Main electronic connection: 3/400 v 50hz Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/ Nozzle movement parallel to closing movement/ Screw position-controlled (high-speed)/ 2 freely programmable screens/ Special equipment: Cooling water manifold 2x 8-way (mounted on fixed and movable plate)/ Connections: G1/2" internal thread, ball valves/ Max. Flow rate: 17 m³/h (at 60°C / 8 bar) Additional equipment Fanuc Robot Machine Benefits Qualitative Machine Benefits Process data acquisition mould protection Technical Machine Benefits Programmable sequence highly dynamic feed speed hydraulic pressure-dependent holding pressure control digital/wear-free position measuring system Extra Information
About this machine
This Sumitomo SHI Demag Systec SP 350 is a hydraulic injection moulding machine — sometimes referred to as an injection molding press — used for the precision processing of plastic components by injecting molten material into a mould under controlled pressure. Sumitomo SHI Demag is a well-established manufacturer of injection moulding machinery, supplying equipment to industries including automotive, packaging, medical, and consumer goods. This machine was built in 2015, is offered in used condition, and is currently located in Germany.
The machine is equipped with a 45 mm screw diameter and accepts moulds with a minimum height of 350 mm and a maximum height of 745 mm. The mould connection dimensions follow the EUROMAP March 1996 standard, with a centring diameter of 160 mm on both the fixed and moving platens. The moving mould mounting platen is supported via linear guides, and position measurement throughout the machine — covering injection, mould, and ejector movement — is handled by a digital, wear-free system using ultrasound and high-resolution rotary encoders. Electrical supply is three-phase 400 V ±10% at 50 Hz, with separate mains connections for the drive and heating circuits. The pump drive delivers 59.0 kW, and a reinforced oil cooler accommodates cooling water supply temperatures up to 35 °C. Mould cooling water and machine cooling water connections are kept separate.
The clamping unit features a four-stage mould closing and four-stage mould opening sequence, toggle lever oil lubrication, and an ejector with position control that allows pressure, force, and velocity to be programmed independently and operated in parallel with mould movement. Active mould protection via sensor during closing is included, along with clamping force control and a manually adjustable monitoring switch for the mould open position. A central grease lubrication system is fitted.
Among the optional equipment installed, the machine includes a speed-controlled servo pump drive (activeDrive), a separate ultra-fine bypass filter unit (activeCool&Clean), and an individual axis movement optimisation system (activeAdjust). Hot runner control is integrated for 12 zones at 2.75 kW, with an additional pneumatic hot runner nozzle control via a 5/2-way valve. Pneumatic equipment includes 6 programmable 5/2-way valves on the movable tool plate and 6 on the fixed tool plate, served by a central maintenance unit. A core pull 1-circuit is fitted with proportional valve control, non-return valves, and a manual pressure relief. Holding pressure switchover operates dependent on hydraulic pressure with pressure recording, and nozzle contact pressure when the mould is open is programmable. Nozzle movement can run parallel to the closing movement.
A cooling water manifold with 2 × 8-way distribution is mounted on both the fixed and movable platens, using G1/2" internal thread ball valve connections and rated for a maximum flow rate of 17 m³/h at 60 °C and 8 bar. Additional installed equipment includes a material hopper with automatic filling and a hopper shut-off with emptying option, two freely programmable operator screens, a flashing light, an emergency stop switch on the operator side, and a Schuko socket (230 V / 10 A) as well as an IECEE three-phase 400 V / 16 A socket, both switchable via the main switch. A Fanuc robot is included with the machine. The paint finish is deep black (RAL 9005) on the machine bed and lower switch cabinet, with signal white (RAL 9003) on the clamping unit, injection unit, safety doors, fixed safety devices, and upper switch cabinet.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
