Search by Category
Search by Country
- Roadtec
- Results: 19 Listings
2020 - Roadtec RX505E Cold Milling
600HP 4-TRACK TIER 4F CUMMINS OSX-15 ENGINE | 24V LED NIGHT LIGHT PACKAGE | GUARDIAN REMOTE TELEMATICS | ACE GRADE AND SLOPE AUTOMATION W/ AUTOCUT | PREWIRED FOR ACE AVERAGING SKI | 6'7" (79") KENNAMETAL SINGLE HIT DRUM W/ 5/8" SPACING | CUTTER HOUSING...
436955 Machinerytrader https://machinelista.com/machine/roadtec-rx505e-cold-milling/
2023 - Roadtec RX600E Cold Milling
Roadtec RX600E Cold Planer...
437891 Machinerytrader https://machinelista.com/machine/roadtec-rx600e-cold-milling/
2009 - Roadtec RX900-4 Cold Milling
Comes with 2 drums, 4 track, 7611 hours, 7'3" drum with standard (5/8) spacing & (3/8) profile spacing. good track pads and belts....
438017 Machinerytrader https://machinelista.com/machine/roadtec-rx900-4-cold-milling/
2018 - Roadtec RX100E Cold Milling
15,840 lbs, 130 HP @ 2,100 RPM, 4' 8" Width; 12' 8" Length, 20" drum width, 8" Cut Depth, 55 gal fuel capacity, 155 gal water capacity. Includes MOBA grade controls....
440829 Machinerytrader https://machinelista.com/machine/roadtec-rx100e-cold-milling/
2016 - Roadtec RX100E Cold Milling
15,840 lbs, 130 HP @ 2,100 RPM, 4'8" width, 20" drum width; 12' 8" Length, 8" Cut Depth, 55 gal fuel capacity, 155 gal water capacity....
440858 Machinerytrader https://machinelista.com/machine/roadtec-rx100e-cold-milling-2/
2018 - Roadtec RX300E Cold Milling
Roadtec RX-300 mill with 48" standard drum (5/8" spacing), Guardian telematics, and ACE Base system. Cummins QSL9 engine....
440934 Machinerytrader https://machinelista.com/machine/roadtec-rx300e-cold-milling-2/
2012 - Roadtec RX400E Cold Milling
2012 Roadtec RX400E Milling Machine 4,525 Hrs Cylinders Dry Belt Good 44 in Drum Pads and U/C Good Front tracks right and left new CAT C9.3 Acert...
440962 Machinerytrader https://machinelista.com/machine/roadtec-rx400e-cold-milling/
2022 - Roadtec RX505E Cold Milling
...
441121 Machinerytrader https://machinelista.com/machine/roadtec-rx505e-cold-milling-2/
2018 - Roadtec RX600E-4 Cold Milling
2018 Roadtec RX600E-4 Cold Planer / Milling Machine, Cummins QSX-15 675 HP Engine, 752 Hours...
441294 Machinerytrader https://machinelista.com/machine/roadtec-rx600e-4-cold-milling/
2017 - Roadtec RX600E-4 Cold Milling
2017 Roadtec RX600E-4 Cold Planer / Milling Machine, Cummins QSX-15 675 HP Engine, 200 Hours...
441327 Machinerytrader https://machinelista.com/machine/roadtec-rx600e-4-cold-milling-2/
2012 - Roadtec RX700 Cold Milling
2012 Roadtec RX-700-4 Asphalt Milling Machine, Caterpillar C18 Diesel Engine (700 HP), 2,614 Hours, 7' Cutting Width, 14" Milling Depth, 25' Discharge Conveyor Belt, (4) 5' Track Pads, (2) MMC-2000 Leveling Controllers For Moba System, Very Clean Ex-Gov't Unit...
441349 Machinerytrader https://machinelista.com/machine/roadtec-rx700-cold-milling-3/
2011 - Roadtec RX700 Cold Milling
2011 Roadtec RX700 3 Track. 91" Drum. Multiple units. Located CO. $69,500...
441384 Machinerytrader https://machinelista.com/machine/roadtec-rx700-cold-milling-4/
2010 - Roadtec RX700 Cold Milling
7 ft Cutting Width, 8 in Milling Depth, Water System, 36 in Discharge Conveyor, 14 in Triple Grouser Track Shoes w/Rubber Inserts...
441448 Machinerytrader https://machinelista.com/machine/roadtec-rx700-cold-milling-6/
2019 - Roadtec RX700E Cold Milling
Caterpillar C18 engine rated at 800 hp Tier 4F Engine Load Control Automatic Traction Control Front, Rear, Crab and Coordinated Steer Direct Hydraulic Planetary Track Drives Foot per minute meter High Pressure Wash Down System Hydraulic Variable Flow Water Pump Auto on/off spray water system 36” Primary Conveyor with Endless Heavy-Duty Belt 36” Secondary Conveyor with Endless Belt Secondary Conveyor Has Full 120 Degree Swing Capability Endless Belts with ¾” Tall Molded Rubber Cleats Truck Rails on Secondary Conveyor Self-Cleaning Head and Tail Pulleys Left Side/Right Side Full Function Operators Control Stations Lighted Instrument Console with Liquid Filled Gauges Air Compressor with Reservoir and Air Tools Operators Console Umbrella with Mounting Hardware Ground Level Controls for Moldboard, End Gates & Elevation Remote Grease Fittings Arranged in Zones Light Package Consisting of Ten (10) 24 Volt Lights Two magnetic base 24 VDC halogen work lights Six 24 VDC power outlets. Polyurethane Bolt-On Replaceable Track Pads Shock mounted operator’s platform and console. Dust Extraction System Safety Controls Including Emergency Engine Shut-Down, Cutter Disengage and Engine Shut-Down when Cutter Door is Opened Rear back-up camera 1 Year factory warranty Options Included in Our Price 24V LED Night Light Package - Light set consisting of four 24V Lights, mounting hardware and wiring. ACE Grade and Slope Automation with Auto-Cut - Automates elevation of front and rear legs of milling machine by using grade sensors or a slope sensor for the right- and left-hand side of machine. System automates rear elevation of machine during entry of each cut. System includes 3 ACE Control panels that can be connected at the operator station and on the ground at the middle of the machine or in the rear to control both sides of the machine, 1 central microcontroller, 1 5-eye sonic sensor, plugs at side of machine for controls and sensors, mounting hardware, cables and junction boxes. Utilizes MOBA brand slope and sonic sensors. Prewiring for ACE Averaging Ski - Includes junction boxes and cables to corners of machine for Averaging Ski, does not included sensors or mounting hardware. 7’ 2” (86") Cutter Housing Bolt-On Cutter Assembly with Mechanical V-Belt Drive W-50 Fairfield Cutter Gear Box with “Break-a-Way” Input Shaft Front & Rear Water Spray Bars with Flow and Pressure Control 14” Depth of Cut with Sloped Front & Rear Moldboards Powered Wrap Around End Gates with Replaceable Wear Shoes "Ironclad" Cutter Housing Made of T-1 Steel with Chromium Clad Wear Liners 7’2” (86") (2.18 m) Kennametal Single Hit Drum with 5/8” Spacing...
441516 Machinerytrader https://machinelista.com/machine/roadtec-rx700e-cold-milling-3/
2018 - Roadtec RX700E Cold Milling
2018 ROADTEC RX-700e MILLING MACHINE. CALL FOR MORE INFORMATION IF NEEDED...
441549 Machinerytrader https://machinelista.com/machine/roadtec-rx700e-cold-milling-4/
2011 - Roadtec RX700E Cold Milling
Equipped: Engine: C-18, Horsepower: 755, Drum Cutting Width: 86” Head, Drum Cutting Depth: 12” (30cm), Track Pads: poly 4 tracks, Conveyor Frame: folding w/ dust extraction, Conveyor Belt Width: 42” Sensors: Moba grade and slope...
441586 Machinerytrader https://machinelista.com/machine/roadtec-rx700e-cold-milling-5/
2005 - Roadtec RX900 Cold Milling
2005 US EPA Label - 7ft Cutting Width - Water System - 42" Discharge Conveyor - CAT Diesel Engine - Air Compressor - 14" Rubber Tracks - Ready to Work!USA EQUIPCO makes no guarantees as to actual hours; we can only report what can be visually observed....
441675 Machinerytrader https://machinelista.com/machine/roadtec-rx900-cold-milling-3/
2013 - Roadtec RX-600E Cold Milling
Used Roadtec RX-600e Cold Planer for sale Hours: 5,221 (ECM was replaced at 2,025 Hours) Maximum cut depth: 13” (330 mm) Standard tooth spacing: 5/8” (16mm) Standard tip diameter: 44” (1,118 mm)...
673982 Machineryline https://machinelista.com/machine/roadtec-rx-600e-cold-milling/
2015 - Roadtec RX-300E Cold Milling
Used Roadtec RX-300e Cold Planer for sale Comes with 2’ 3’ 4’ milling drums Max milling depth – 12.5” Weight = 45,100 lbs...
674195 Machineryline https://machinelista.com/machine/roadtec-rx-300e-cold-milling/
