Machine Photos
BusinessLoans
Business Loans
Wiseman Finance
Asset Finance
2002 - Schaublin 180 CCN R-T Lathe
()- Listing No
- 963131
- Year
- 2002
- Manufacturer
- Schaublin
- Model
- 180 CCN R-T
- Condition
- Used
- Location
- Price
- POA
- Description
-
Group: Lathes Control: GE Fanuc Series 18i-T Centre height: 275 mm Distance between centres: 600 mm Swing over cross-slide: 150 mm Swing over bed: 600 mm Maximum turning length: 630 mm Bar passage: 60 mm Transversal strocke (X axis): 230 mm Resolution: mm Turret slide: SAUTER Number of positions: 8 Fixed tools turret: 8 Inner cone diameter: 20 x 20 mm Inner cone DIN: VDI 30 Camlock: A2-6 Inner taper type: F48 from: 30 t/min up to: 4000 t/min Internal spindle diameter: 60 mm Feeds: 0 - 5000 mm/min Rapid traverse X: 8 m/min Rapid traverse Y: 10 m/min Spindle motor: 15 / 18.5 kW Air connect: 5 - 7 bar Flow rate cooling water pump: 10 l/min Voltage 50 Hz 3x: 400 Volt Noise level: 75 dB (A) Total power required: 24 kVA Machine's weight about: 2460 kg 3-jaw chuck diameter: 250 mm
About this machine
The Schaublin 180 CCN R-T is a CNC lathe — sometimes referred to as a turning centre — designed for precision metal turning operations. Lathes of this type are used to produce cylindrical and contoured components by rotating the workpiece against a cutting tool, and are found across toolmaking, aerospace, automotive, and general engineering workshops. Schaublin is a long-established Swiss precision machine tool manufacturer with a strong reputation for accuracy and build quality, serving industries where tight tolerances and surface finish are critical.
This machine is controlled by a GE Fanuc Series 18i-T CNC system, a well-regarded industrial controller that provides reliable and flexible operation. The spindle runs from 30 to 4,000 rpm and is driven by a 15/18.5 kW motor, giving a good combination of low-speed torque for heavy cuts and high-speed capability for finishing work. The internal spindle diameter is 60 mm, matched by a bar passage capacity of 60 mm, allowing bar stock up to that diameter to be fed through. The spindle nose is configured with an A2-6 camlock and an F48 inner taper, and accepts tooling to VDI 30 standard.
The working envelope is defined by a centre height of 275 mm, a distance between centres of 600 mm, and a maximum turning length of 630 mm. Swing over the bed is 600 mm, while swing over the cross-slide is 150 mm. The X-axis transversal stroke is 230 mm. Feed rates run from 0 to 5,000 mm/min, with rapid traverse of 8 m/min on the X axis and 10 m/min on the Y axis.
The turret is a SAUTER unit with eight positions for fixed tools, using 20 × 20 mm inner cone dimensions and VDI 30 tooling. A 250 mm three-jaw chuck is included. The coolant system delivers 10 litres per minute, and the machine requires a compressed air supply of 5 to 7 bar. Electrical supply requirements are 400 V, 50 Hz, three-phase, with a total power demand of 24 kVA. The declared noise level is 75 dB(A), and the machine weighs approximately 2,460 kg. The unit is listed as used and dates from 2002.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
