Search by Category
- Furukawa
- Results: 49 Listings
Furukawa HCR9ES Vertical Drill
Furukawa HCR9-ES Rock Drill Stock Number: 250-07-4 Call for Price Make: Furukawa Model: HCR9-ES SN: GH831 Type: Rock Drill...
397811 Machinerytrader https://machinelista.com/machine/furukawa-hcr9es-vertical-drill/
2023 - Furukawa HCR900ESV Vertical Drill
2023 Furukawa HCR900ESV Top Hammer Rock Drill - HD818 Drifter - Cummins QSB6.7 (Tier4 Final) - 215 cfm Discharge Air Flow - 706 cfm Suction This unit is the optimal construction and site services top hammer drill. Call Eastrock Equipment for more information and to set up a demo!...
397952 Machinerytrader https://machinelista.com/machine/furukawa-hcr900esv-vertical-drill/
2023 - Furukawa HCR900ESV Vertical Drill
2023 Furukawa HCR900ESV Top Hammer Rock Drill - HD818 Drifter - Cummins QSB6.7 (Tier4 Final) - 215 cfm Discharge Air Flow - 706 cfm Suction This unit is the optimal construction and site services top hammer drill. Call Eastrock Equipment for more information and to set up a demo!...
398047 Machinerytrader https://machinelista.com/machine/furukawa-hcr900esv-vertical-drill-2/
2023 - Furukawa HCR1100ER Vertical Drill
2023 Furukawa HCR1100ER Top Hammer Rock Drill - HD822 Drifter - Remote control available - Cummins QSB6.7 (Tier4 Final) - 275 cfm Discharge Air Flow - 918 cfm Suction This unit is the optimal construction and site services top hammer drill. Call Eastrock Equipment for more information and to set up a demo!...
398176 Machinerytrader https://machinelista.com/machine/furukawa-hcr1100er-vertical-drill/
2003 - Furukawa HCR1200ED Vertical Drill
PRICED TO SELL. "As Is Where Is" Furukawa - Complete with multiple rod sections. The FURUKAWA HD700 series drifter is designed to minimize drill noise and vibration without sacrificing performance. Incorporating a new piston design, the HD712 drifter maximizes energy transmission and drills effectively in a variety of rock types. The Reverse Percussion System (RPS) makes it easier to free a stuck rod. A substantial increase in extraction force allows the field proven RPS (optional) to remove struck rods quickly. High out-put compressor increases flushing air,provides faster drilling and decreases bit wear. The upgraded dust collector has a suction capacity. The dust collector includes an effective pre-cleaner to reduce the escape available for difficult drilling conditions Maximize operator performance with the ultimate in ergonomic cab designs. HCR1200 ED cabs are ergonomically friendly with features that reduce operator fatigue. Cabs are 43″ (1,100mm) with ROPS/FOPS standard. All cabs are air-conditioned and continuously pressurized with filtered air to maintain a comfortable operating environment. Rubber-mounted engine frame isolates cab from engine vibrations. Single-lever drilling control for easy operation. Large windows maximize operator visibility. Walk-around ground level maintenance provides fast, easy upkeep or repair. High-visibility gauges allow operator to monitor machine functions while remaining focused on the drilling. Low-emission Tier III engines offer low fuel consumption and meets US exhaust emissions regulations. Advanced rotary rod changer allows easy drill rod changes. Operators can add and remove rods using a single lever. Rods can also be indexed in the rack to distribute wear evenly and reduce costs. HCR1200 ED features 12′ rods with extendable boom for increased drill pattern. Heavy-duty Furukawa undercarriage featuring a pentagonal section design to reduce dirt build-up and track wear ensures strength and durability. High-output compressor increases flushing air, provides faster drilling and decreases bit wear. Reliable dust control system increases suction capacity and provides effective pre-cleaner to reduce escape of drilling dust. An optional dust suppression system is available for difficult drilling conditions. Angle indicator for quick and easy drilling alignment. OPERATIONAL Operating Weight with Fuel/Oil 34,408 lb 14,700 kg Overall length 32'-9" 9,975 mm Ground contact length 9'-1.5" 2,780 mm Overall width with pre-cleaner 10'4" 3,125 mm Overall width 7'-10.5" 2,400 mm Width of shoe 13" 330 mm Overall height shipping 9'-9" 2,975 mm DRIFTER Model HD712 Weight 485 lb 220 kg Impact rate 2,250 - 2,500 bpm Number of rotations 0 - 190 rpm UNDERCARRIAGE Ground clearance 18.11" 460 mm Oscillating angle ±7.5° deg Travel speed 0 - 1.9 mph 0 - 3.1 km/h Max grade of hill climb 57.7 (30°) % ENGINE Make/model CUMMINS® / QSB 6.7 Type Turbocharged and air to air after cooled diesel, direct fuel injection, electronic governor. Rated output 240hp / 2,500rpm 179kw / 2,500rpm Meets Tier III and EU stage-3 Low-emission, low fuel consumption Tier III Cummins® engine meets major exhaust emissions regulations in US and Europe. Net usable output available at flywheel of the installed engine with all the standard accessories. SAEJ1349, SAEJ1995 conditions. Piston displacement 1.7 gal 6.7 liter Fuel tank capacity 111 gal 420 liter HYDRAULIC PUMP Type 2-variable displacement axial piston pumps; largest for travel, impact and feed, smaller for drifter rotation. 3-gear pumps for cooling and dust collector, boom and rod changer. Hydraulic oil tank capacity 57 gal 215 liter COMPRESSOR Model AIRMAN® PDS265-S32D Free air delivery 275.2 CFM 7.8 m3/min Working air pressure 149 psi 1.03 MPa BOOM Model JE326-132 Lift angle (up-down) 45° - 20° Swing angle (right-left) 35° - 5° Extension length 3'-10" 1,200 mm GUIDE SHELL Model GH832-30 Length 25'-6" 7,800 mm Feed length 15'-0" 4,620 mm Swing angle (right-left) 30° - 90° Tilt angle 170° Maximum pulling force 6,632 lbs 29.5 kN Dust collector Suction capacity 1,058 CFM 30 m3/min Number of filter 5 ROD ARRANGEMENT Type Rod changer Number of rods 6 + 1 (starter rod) BIT & ROD Bit diameter 3" - 4" 76 mm - 102 mm Type of bit Cross, Button, Spike Rod size 38H, 38R, 45R (51R) Rod length 12' 3,660 mm Starter rod length 12' - 14' 3,660 mm / 4,000 mm...
398235 Machinerytrader https://machinelista.com/machine/furukawa-hcr1200ed-vertical-drill/
2021 - Furukawa HCR1450ED II Vertical Drill
2021 Furukawa HCR1450 EDII - Fully serviced and inspected by dealer - Ready to work Call Eastrock Equipment for more information!...
398306 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill/
2006 - Furukawa HCR1500ED Vertical Drill
EQUIPO: PERFORADORA MARCA: FURUKAWA MODELO: HCR1500-ED AÑO: 2006 N/S: 1452094...
398384 Machinerytrader https://machinelista.com/machine/furukawa-hcr1500ed-vertical-drill/
Furukawa HCR9ES Vertical Drill
Furukawa HCR9-ES Rock Drill Stock Number: 250-07-4 Call for Price Make: Furukawa Model: HCR9-ES SN: GH831 Type: Rock Drill...
444689 Machinerytrader https://machinelista.com/machine/furukawa-hcr9es-vertical-drill-2/
2023 - Furukawa HCR900ESV Vertical Drill
2023 Furukawa HCR900ESV Top Hammer Rock Drill - HD818 Drifter - Cummins QSB6.7 (Tier4 Final) - 215 cfm Discharge Air Flow - 706 cfm Suction This unit is the optimal construction and site services top hammer drill. Call Eastrock Equipment for more information and to set up a demo!...
444721 Machinerytrader https://machinelista.com/machine/furukawa-hcr900esv-vertical-drill-4/
2023 - Furukawa HCR900ESV Vertical Drill
2023 Furukawa HCR900ESV Top Hammer Rock Drill - HD818 Drifter - Cummins QSB6.7 (Tier4 Final) - 215 cfm Discharge Air Flow - 706 cfm Suction This unit is the optimal construction and site services top hammer drill. Call Eastrock Equipment for more information and to set up a demo!...
444729 Machinerytrader https://machinelista.com/machine/furukawa-hcr900esv-vertical-drill-5/
2023 - Furukawa HCR1100ER Vertical Drill
2023 Furukawa HCR1100ER Top Hammer Rock Drill - HD822 Drifter - Remote control available - Cummins QSB6.7 (Tier4 Final) - 275 cfm Discharge Air Flow - 918 cfm Suction This unit is the optimal construction and site services top hammer drill. Call Eastrock Equipment for more information and to set up a demo!...
444763 Machinerytrader https://machinelista.com/machine/furukawa-hcr1100er-vertical-drill-2/
2003 - Furukawa HCR1200ED Vertical Drill
PRICED TO SELL. "As Is Where Is" Furukawa - Complete with multiple rod sections. The FURUKAWA HD700 series drifter is designed to minimize drill noise and vibration without sacrificing performance. Incorporating a new piston design, the HD712 drifter maximizes energy transmission and drills effectively in a variety of rock types. The Reverse Percussion System (RPS) makes it easier to free a stuck rod. A substantial increase in extraction force allows the field proven RPS (optional) to remove struck rods quickly. High out-put compressor increases flushing air,provides faster drilling and decreases bit wear. The upgraded dust collector has a suction capacity. The dust collector includes an effective pre-cleaner to reduce the escape available for difficult drilling conditions Maximize operator performance with the ultimate in ergonomic cab designs. HCR1200 ED cabs are ergonomically friendly with features that reduce operator fatigue. Cabs are 43″ (1,100mm) with ROPS/FOPS standard. All cabs are air-conditioned and continuously pressurized with filtered air to maintain a comfortable operating environment. Rubber-mounted engine frame isolates cab from engine vibrations. Single-lever drilling control for easy operation. Large windows maximize operator visibility. Walk-around ground level maintenance provides fast, easy upkeep or repair. High-visibility gauges allow operator to monitor machine functions while remaining focused on the drilling. Low-emission Tier III engines offer low fuel consumption and meets US exhaust emissions regulations. Advanced rotary rod changer allows easy drill rod changes. Operators can add and remove rods using a single lever. Rods can also be indexed in the rack to distribute wear evenly and reduce costs. HCR1200 ED features 12′ rods with extendable boom for increased drill pattern. Heavy-duty Furukawa undercarriage featuring a pentagonal section design to reduce dirt build-up and track wear ensures strength and durability. High-output compressor increases flushing air, provides faster drilling and decreases bit wear. Reliable dust control system increases suction capacity and provides effective pre-cleaner to reduce escape of drilling dust. An optional dust suppression system is available for difficult drilling conditions. Angle indicator for quick and easy drilling alignment. OPERATIONAL Operating Weight with Fuel/Oil 34,408 lb 14,700 kg Overall length 32'-9" 9,975 mm Ground contact length 9'-1.5" 2,780 mm Overall width with pre-cleaner 10'4" 3,125 mm Overall width 7'-10.5" 2,400 mm Width of shoe 13" 330 mm Overall height shipping 9'-9" 2,975 mm DRIFTER Model HD712 Weight 485 lb 220 kg Impact rate 2,250 - 2,500 bpm Number of rotations 0 - 190 rpm UNDERCARRIAGE Ground clearance 18.11" 460 mm Oscillating angle ±7.5° deg Travel speed 0 - 1.9 mph 0 - 3.1 km/h Max grade of hill climb 57.7 (30°) % ENGINE Make/model CUMMINS® / QSB 6.7 Type Turbocharged and air to air after cooled diesel, direct fuel injection, electronic governor. Rated output 240hp / 2,500rpm 179kw / 2,500rpm Meets Tier III and EU stage-3 Low-emission, low fuel consumption Tier III Cummins® engine meets major exhaust emissions regulations in US and Europe. Net usable output available at flywheel of the installed engine with all the standard accessories. SAEJ1349, SAEJ1995 conditions. Piston displacement 1.7 gal 6.7 liter Fuel tank capacity 111 gal 420 liter HYDRAULIC PUMP Type 2-variable displacement axial piston pumps; largest for travel, impact and feed, smaller for drifter rotation. 3-gear pumps for cooling and dust collector, boom and rod changer. Hydraulic oil tank capacity 57 gal 215 liter COMPRESSOR Model AIRMAN® PDS265-S32D Free air delivery 275.2 CFM 7.8 m3/min Working air pressure 149 psi 1.03 MPa BOOM Model JE326-132 Lift angle (up-down) 45° - 20° Swing angle (right-left) 35° - 5° Extension length 3'-10" 1,200 mm GUIDE SHELL Model GH832-30 Length 25'-6" 7,800 mm Feed length 15'-0" 4,620 mm Swing angle (right-left) 30° - 90° Tilt angle 170° Maximum pulling force 6,632 lbs 29.5 kN Dust collector Suction capacity 1,058 CFM 30 m3/min Number of filter 5 ROD ARRANGEMENT Type Rod changer Number of rods 6 + 1 (starter rod) BIT & ROD Bit diameter 3" - 4" 76 mm - 102 mm Type of bit Cross, Button, Spike Rod size 38H, 38R, 45R (51R) Rod length 12' 3,660 mm Starter rod length 12' - 14' 3,660 mm / 4,000 mm...
444784 Machinerytrader https://machinelista.com/machine/furukawa-hcr1200ed-vertical-drill-2/
2021 - Furukawa HCR1450ED II Vertical Drill
2021 Furukawa HCR1450 EDII - Fully serviced and inspected by dealer - Ready to work Call Eastrock Equipment for more information!...
444801 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-2/
2006 - Furukawa HCR1500ED Vertical Drill
EQUIPO: PERFORADORA MARCA: FURUKAWA MODELO: HCR1500-ED AÑO: 2006 N/S: 1452094...
444817 Machinerytrader https://machinelista.com/machine/furukawa-hcr1500ed-vertical-drill-2/
1997 - Furukawa HCR9 Vertical Drill
FURUKAWA VERTICAL DRILLS HCR9-DS2 MODEL = HCR9-DS2 YEAR = 1997 CHASSIS NO = HCR9-DS2513445 LOCATION = KOREA PRICE = ON CALL STOCK NO: FB9512 MORE INFO ON REQUEST....
458183 Machinerytrader https://machinelista.com/machine/furukawa-hcr9-vertical-drill/
2005 - Furukawa HCR10DSII Vertical Drill
FURUKAWA VERTICAL DRILLS HCR10-DS2 MODEL = HCR10-DS2 YEAR = 2005 SERIAL NO = HCR10-DS112112140 LOCATION = KOREA PRICE = ON CALL STOCK NO: FB9428 WORKING CONDITION IS REALLY GOOD MORE INFO ON REQUEST....
458519 Machinerytrader https://machinelista.com/machine/furukawa-hcr10dsii-vertical-drill-7/
2020 - Furukawa HCR950DS Vertical Drill
Stock ID : 140922-04 Used Drills FURUKAWA HCR950DS 2020yr For Sale Manufacture : FURUKAWA Model : HCR950DS Year : 2020 CONTACT US Winwin Used Machinery Mobile : + (Simson Lee) TEL : + FAX : + Messenger Line, Viber ID : winwinused Whatsapp,Wechat,Kakao are available...
458634 Machinerytrader https://machinelista.com/machine/furukawa-hcr950ds-vertical-drill/
2021 - Furukawa HCR1450ED II Vertical Drill
Cummins QSB 6.7, HD 8285 drifter, 3.0" - 5.0" bit range, 72' Maximum drilling depth, Continuously pressurized cab, 37,800 lb. operating weight. ...
471083 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-4/
2022 - Furukawa HCR1450ED II Vertical Drill
(2022) FRD 1450ED with 2251 hours on Cummins 6.7 engine & 872 impact hrs on 26KW hammer & 353 CFM compressor. Set up for T-45 M/F steel with 16' starter and (7) 12' changes. FOPS/ROPS cab with A/C & heat. Has rod changer, dust collector, anti-jam circuit, & MOBA "all-in-one" 3-axis angle indicator with rear/side view cameras. Very Good condition....
472021 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-5/
2023 - Furukawa HCR L110 Vertical Drill
(2023) Furukawa L110-828 hyd rock drill with 1,012 hrs on Cat C9 engine & 550 impact hrs on 28kw drifter. Set up for T-51 steel with up to 16' starter rod & (7) 12' changes. MOBA all-in-one 3-axis angle indicator w/ rear and side cameras. 477 CFM compressor. Still under warranty, VG condition....
472061 Machinerytrader https://machinelista.com/machine/furukawa-hcr-l110-vertical-drill/
2022 - Furukawa HCR1450ED II Vertical Drill
1,077 Hours Drifter resealed over the summer HD828S drifter Currently working in the field. Excellent condition...
473105 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-6/
2019 - Furukawa HCR1450ED II Vertical Drill
Unit has 4,235 total hours Unit will be fully cleaned and freshly serviced. Excellent condition....
473161 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-7/
2019 - Furukawa HCR1450ED II Vertical Drill
31 hours on new engine Approx. 4000 total frame hours & 1,621 percussion hours HD828S drifter Currently set up for T51 Excellent condition...
473219 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-8/
2013 - Furukawa DCR20 Vertical Drill
DTH Class* CAT C-13 Tier III Diesel* Set Up For 4" Drill Pipe* Joystick Operated Rod Changer Carousel Water-Injection System Cyclone Dust Collector...
485543 Machinerytrader https://machinelista.com/machine/furukawa-dcr20-vertical-drill/
2011 - Furukawa DCR20 Vertical Drill
3.5 - 6.5 Inch Class* CAT C-13 Tier III Engine* 3" Drill Pipe* Estimated 6000 Total Hours with less than 500 hours on out of Frame Rebuild by CAT with warranty Angle Indicator...
485609 Machinerytrader https://machinelista.com/machine/furukawa-dcr20-vertical-drill-2/
2021 - Furukawa DCR22 Vertical Drill
Low hour down the hole rig. Dealer service records available. New compressor installed at 3,200 hours. ...
485675 Machinerytrader https://machinelista.com/machine/furukawa-dcr22-vertical-drill/
1995 - Furukawa HCR9ES Vertical Drill
- True low hour 1995 Furukawa HCR9ES - Unit has been fully serviced. - Throttle cable has been replaced. - ALL but 2 cylinders have been resealed. The only 2 that we did not do, was the inner boom extension (very slight small drip) and the small dust hood slide (it is not leaking). - Replaced some hoses. Regrouped all hoses. - Pins & Bushings are tight. - Repaired some wiring and new fuse set. - All new gauges as old gauges were vandalized. - Engine sounds excellent. Good air & drifter is great....
485807 Machinerytrader https://machinelista.com/machine/furukawa-hcr9es-vertical-drill-3/
2023 - Furukawa HCR1100ED Vertical Drill
HCR1100ED, Cummins QSB 6.7, HD818 Drifter, 2.5" - 3.5" Bit Range, 70' Maximum Drilling Depth, Continuously pressurized cab, 29,000 lb. operating weight....
486014 Machinerytrader https://machinelista.com/machine/furukawa-hcr1100ed-vertical-drill/
2022 - Furukawa HCR1100ED Vertical Drill
HCR1100ED, Cummins QSB 6.7, HD818 Drifter, 2.5" - 3.5" Bit Range, 70' Maximum Drilling Depth, Continuously pressurized cab, 29,000 lb. operating weight. ...
486068 Machinerytrader https://machinelista.com/machine/furukawa-hcr1100ed-vertical-drill-2/
2011 - Furukawa HCR1200ED II Vertical Drill
- Engine Hours 9,741 - Percussion / Impact Hours: 4,470 - Engine said to have been overhauled at 7,115 hours...
486317 Machinerytrader https://machinelista.com/machine/furukawa-hcr1200ed-ii-vertical-drill-5/
2005 - Furukawa HCR1200ED II Vertical Drill
**DRIFTER ONLY** Surplus / New HD712 Hydraulic Drifter...
486372 Machinerytrader https://machinelista.com/machine/furukawa-hcr1200ed-ii-vertical-drill-6/
2022 - Furukawa HCR1450ED II Vertical Drill
2022 Furukawa HCR1450EDII Cummins Engine 1,360 Engine Hours 468 Percussion Hours Set Up for T51 Still has manufacturer warranty Please contact for more details...
486425 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-9/
2022 - Furukawa HCR1450ED II Vertical Drill
Cummins QSB 6.7, HD 8285 drifter, 3.0" - 5.0" bit range, 72' Maximum drilling depth, Continuously pressurized cab, 37,800 lb. operating weight....
486488 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-10/
2021 - Furukawa HCR1450ED II Vertical Drill
Unit has 2,231 total hours & 1,068 percussion hours. Set up for T51 drill steel. HD828S drifter Excellent condition....
486564 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-11/
2019 - Furukawa HCR1450ED II Vertical Drill
2019 Furukawa HCR1450EDII Set Up For T51 18 Hours on New Engine 1,621 Hours on Drifter Tier 4 Engine Contact For Details...
486616 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-12/
2019 - Furukawa HCR1450ED II Vertical Drill
2019 Furukawa HCR1450EDII Set Up For T51 4,971 Engine Hours 2,132 Drifter Hours Tier 4 Engine Call For Details...
486718 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-14/
2018 - Furukawa HCR1450ED II Vertical Drill
2018 Furukawa HCR1450EDII 4,980 Engine Hours 1,935 Percussion Hours Set Up For T51 Call For Details...
486815 Machinerytrader https://machinelista.com/machine/furukawa-hcr1450ed-ii-vertical-drill-16/
2014 - Furukawa HCR1500ED II Vertical Drill
Dealer service records available. Unit very well maintained. Operational and ready to drill. ...
486911 Machinerytrader https://machinelista.com/machine/furukawa-hcr1500ed-ii-vertical-drill/
2014 - Furukawa HCR1500ED II Vertical Drill
Dealer service records available. Unit very well maintained. Operational and ready to drill. ...
486961 Machinerytrader https://machinelista.com/machine/furukawa-hcr1500ed-ii-vertical-drill-2/
2013 - Furukawa HCR1500ED II Vertical Drill
New long-block engine installed at 9,500 hours. Unit currently in drilling condition and in operation....
487015 Machinerytrader https://machinelista.com/machine/furukawa-hcr1500ed-ii-vertical-drill-3/
