Machine Photos
Mehmi Financial
Equipment Finance
Wiseman Finance
Asset Finance
2013 - Brandt KDF 220 – High Edge Bander
()- Listing No
- 988957
- Year
- 2013
- Manufacturer
- Brandt
- Model
- KDF 220 - High
- Condition
- Used
- Location
- Belgium
- Price
- POA
- Description
-
Machine number: 0-261-20-7810 Workpiece thickness: 8 - 60 mm Workpiece overhang: 38 mm Edge material of the roll: 0.4 - 3 mm Edge material in strips: 0.4 - 6 mm Min. workpiece width: 70 mm (with thickness 8-22 mm), 120 mm (with thickness 23-40 mm), 150 mm (with thickness 41-60 mm) Feed speed: 11 m/min Machine equipment Joint milling unit 2 x 2.2 kW motor Gluing unit with workpiece edge preheating Pressure zone with driven main pressure roller and 2 non-driven pressure rollers Hood unit 2 x 0.18 kW pneumatic adjustment phase/straight Radius and fine milling unit 2 x 0.27 kW Form milling unit 1 x 0.35 kW Profile scrapers Glue joint scrapers
About this machine
This Brandt KDF 220 is a used edge bander — sometimes referred to as an edge banding machine — dating from 2013 and currently located in Belgium. Edge banders are woodworking machines used to apply and finish edge material to panel products such as MDF, chipboard, and plywood, sealing the exposed substrate edges for both aesthetic and protective purposes. Brandt is a well-established German manufacturer of edge banding and panel processing machinery, long recognised in the furniture production, joinery, and cabinetmaking industries for building reliable, production-oriented equipment.
This machine carries serial number and operates at a feed speed of 11 metres per minute. It accepts workpieces ranging from 8 to 60 mm in thickness, with a workpiece overhang of 38 mm. Minimum workpiece width varies by thickness: 70 mm for pieces between 8 and 22 mm thick, 120 mm for pieces between 23 and 40 mm thick, and 150 mm for pieces between 41 and 60 mm thick. Edge material on rolls can be applied in thicknesses from 0.4 to 3 mm, while strip edge material is accommodated from 0.4 to 6 mm.
The machine is equipped with a joint milling unit driven by two motors of 2.2 kW each, providing a clean, prepared edge surface ahead of bonding. The gluing unit includes workpiece edge preheating, which promotes consistent adhesive application. A pressure zone follows, comprising one driven main pressure roller and two non-driven pressure rollers to ensure firm edge adhesion along the full workpiece length. A hood unit is fitted, powered by two 0.18 kW motors with pneumatic adjustment for both radius and straight profiles.
Further finishing is handled by a radius and fine milling unit equipped with two 0.27 kW motors, and a form milling unit rated at 0.35 kW. Profile scrapers and glue joint scrapers are also included, completing the trimming and finishing sequence. This combination of units makes the machine capable of processing a range of edge profiles from flat to radiused, with integrated glue line cleaning.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
