Machine Photos
Business Funding Now
Credit Lines
Capital Infusion
Machine Finance
DMG DMU 50 V Machining Center
()- Listing No
- 965820
- Year
- Manufacturer
- DMG
- Model
- DMU 50 V
- Condition
- Used
- Location
- Price
- POA
- Description
-
Group: Machining centres Control: HEIDENHAIN TNC 426 Time under power: 82274 Heures Number of axis total: 5 Table length: 500 mm Table width: 380 mm Number of T-channels: 5 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Centering bore diameter: 30H7 mm Transversal travel (y-axis): 380 mm Swivel angle (a-axis): 180 ° B axis: ° up to: 8000 t/min Number of tools: 24 (2x12) Tool diameter: 80 mm Diameter with free adjacent pockets: 130 mm Tool lenght: 280 mm Max. tool-weight: 6 kg Spindle nose SK: 40 DIN 69871 A from: 20 t/min Feed range: 10000 mm/min Rapid traverse: 30 m/min Vertical quill travel: 90 mm Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 15 / 10 kW Torque max: 130 / 87 Nm Total power required: 26 kVA Machine's weight about: 3500 kg Touch Probe: HEIDENHAIN
About this machine
This DMG DMU 50 V is a used machining center — sometimes referred to as a CNC machining center or milling center — a multi-axis machine tool designed to perform precision milling, drilling, boring, and contouring operations on complex workpieces. DMG (Deckel Maho Gildemeister) is a well-established German manufacturer of high-precision machine tools, widely recognised across aerospace, automotive, medical, and general engineering industries for producing sophisticated CNC milling and turning equipment.
The machine is configured for five-axis operation, enabling simultaneous multi-directional cutting that is essential for complex three-dimensional components. Control is provided by a Heidenhain TNC 426 CNC system, a well-regarded contouring control known for its conversational programming and precise motion management. A Heidenhain touch probe is also included, supporting on-machine workpiece measurement and tool setting. The machine has accumulated 82,274 hours under power.
The working table measures 500 mm in length by 380 mm in width and is equipped with five T-slots spaced 63 mm apart, each 14H7 mm wide, with a centring bore diameter of 30H7 mm. Axis travel on the Y-axis is 380 mm, the A-axis swivels through 180 degrees, and vertical quill travel extends to 90 mm. Rapid traverse rate is 30 m/min, and the feed range reaches up to 10,000 mm/min.
The spindle accepts SK 40 tooling to DIN 69871 A standard and operates across a speed range of 20 to 8,000 rpm. Spindle motor output is rated at 15 kW continuous and 10 kW S1, delivering a maximum torque of 130 Nm and 87 Nm respectively. The automatic tool changer accommodates 24 tools in a dual-arm configuration (2 × 12), handling tools up to 80 mm in diameter (130 mm with adjacent pockets free), up to 280 mm in length, and up to 6 kg in weight.
Electrical requirements are 400 V, 50 Hz, three-phase, with a total power demand of 26 kVA. The machine requires a compressed air supply at 6 bar. Shipping weight is approximately 3,500 kg.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
