Machine Photos
Lexington
Equipment Financing
Creditpath
Equipment Financing
2001 - DMG DMU 60 P HY-DI Machining Center
()- Listing No
- 966272
- Year
- 2001
- Manufacturer
- DMG
- Model
- DMU 60 P HY-DI
- Condition
- Used
- Location
- Price
- POA
- Description
-
Group: Machining centres Control: HEIDENHAIN MillPlus /3R-WorkMaster +3R-WorkShopManager Number of axis simultaneous: 5 Number of spindles: 1 Number of tables: 1 Circulary table diameter: 630 mm Number of T-channels: 9 Distance of the T-slots: 63 mm T-channel width: 14H7 mm Centering bore diameter: 50H6 mm Transversal travel (y-axis): 700 mm Diameter: 920 mm Table divisions (B): 360 ° Swivel angle (a-axis): +45/-30 ° Holding torque A-axis: 3866 Nm Clamping torque C-axis: 6008 Nm Torque max: 2650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 350 mm Max. tool-weight: 10 kg Spindle nose SK: 40 DIN 69871 up to: 15000 mm/min longitudinal from: 20 mm/min transversal from: 20 mm/min vertical from: 20 mm/min Rapid traverse: 40 m/min Resolution: µm Air connect: 5 - 8 bar Voltage 50 Hz 3x: 400 Volt Total power required: 44 kVA Noise level: 80 dB (A) Machine's weight about: 7500 kg Set of toolholders: SK 40 ca 150x High pression colant device: 40 bar
About this machine
This DMG DMU 60 P HY-DI is a used machining center — sometimes referred to as a CNC machining center or milling machining center — dating from 2001. Machining centers are multi-axis CNC machine tools used for precision milling, drilling, boring, and tapping of metal and other engineering materials, typically in aerospace, automotive, mould-making, and general precision engineering. DMG, part of the DMG Mori group, is one of the world's leading manufacturers of CNC machine tools and is widely recognised for its high-precision milling and turning equipment serving demanding industrial sectors globally.
This machine operates with five simultaneous axes, giving it the capacity to perform complex contouring and multi-face machining in a single setup. Control is provided by a Heidenhain MillPlus system paired with a 3R-WorkMaster and 3R-WorkShopManager, the latter two being a pallet and tool management solution oriented toward automated or near-automated production environments. The single spindle accepts SK 40 toolholders to DIN 69871 and is capable of feeding at rates from 20 mm/min up to 15,000 mm/min, with a rapid traverse of 40 m/min. Transverse (Y-axis) travel is 700 mm.
The rotary table has a diameter of 630 mm and carries nine T-slots pitched at 63 mm, with a T-slot width of 14H7 and a centring bore of 50H6. Full 360° continuous rotation is available on the C-axis, while the A-axis swivels between +45° and −30°. Axis holding torque on the A-axis is rated at 3,866 Nm, with a clamping torque on the C-axis of 6,008 Nm and a maximum spindle torque of 2,650 Nm. The outer table diameter is noted as 920 mm.
The integrated tool magazine holds up to 180 tools. Standard tool diameter capacity is 80 mm, expanding to 160 mm when adjacent pockets are left free. Maximum tool length is 350 mm and maximum tool weight per holder is 10 kg. Approximately 150 SK 40 toolholders are included with the machine. A high-pressure coolant system operating at 40 bar is fitted.
The machine requires a 400 V / 50 Hz three-phase supply and draws a total of 44 kVA. Compressed air connection requires 5–8 bar. The machine weighs approximately 7,500 kg and has a declared noise level of 80 dB(A). Positional resolution is in the micrometre range, consistent with precision machining applications.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
