Machine Photos
BusinessLoans
Business Loans
Lexington
Equipment Financing
1999 - Hebrock HFF 08 Edge Bander
()- Listing No
- 989004
- Year
- 1999
- Manufacturer
- Hebrock
- Model
- HFF 08
- Condition
- Used
- Location
- Belgium
- Price
- POA
- Description
-
Machine number: 08/203 Tension: 230/400V 50Hz 3Ph max. edge thickness: approx. 3 mm max. workpiece height: approx. 50 mm min. Internal radius of panel: approx. 40 mm Milling speed: 12000 rpm Work table height: 865 mm 2 motors each 0,37 kW Combined tooling chamfer and radius Radius 3 mm tooling
About this machine
This Hebrock HFF 08 is a used edge bander — sometimes referred to as an edge banding machine — a type of woodworking equipment used to apply and trim edging material to the exposed edges of panel-based components such as MDF, chipboard, and plywood. Hebrock is a German manufacturer with a long-standing focus on edge banding machinery for the woodworking and furniture-making industries, and this machine is a representative example of their smaller, single-sided banding equipment.
The machine carries serial number 08/203 and was manufactured in 1999. It is powered by a three-phase electrical supply at 230/400 V, 50 Hz, and is fitted with two motors each rated at 0.37 kW. The milling unit runs at a spindle speed of 12,000 rpm, providing the rotational performance needed for clean edge trimming and profiling.
In terms of capacity, the machine accepts edge banding material up to approximately 3 mm in thickness, making it suitable for a range of solid and veneer edging tapes. The maximum workpiece height it can accommodate is approximately 50 mm, and the minimum internal radius of a panel that can be fed through is approximately 40 mm — a useful figure when working with shaped or curved components. The work table sits at a height of 865 mm, which is a standard ergonomic working height for standing operators.
The tooling configuration is a combined chamfer and radius set, including a 3 mm radius tool, allowing the machine to produce both chamfered and radiused edge profiles without a full tooling changeover. The machine is currently located in Belgium and is offered in used condition.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
