Machine Photos
Lexington
Equipment Financing
Capital Infusion
Machine Finance
2010 - Homag KAL 310 7 A3 Edge Bander
()- Listing No
- 977992
- Year
- 2010
- Manufacturer
- Homag
- Model
- KAL 310 7 A3
- Condition
- Used
- Location
- Germany
- Price
- POA
- Description
-
This HOMAG KAL 310/7/A3 was manufactured in 2010. A used single-sided edge banding machine featuring a 28-position ISAS edge magazine, PU gluing unit, and Boomerang return system. It includes a joint milling unit with two motors and a PU 34 gluing system with a capacity up to 6 kg/h. Ideal for precise edge banding applications. Contact us for more information about this machine. ISAS edge magazine: 28 positions (selectable edges) Gluing unit: PU 34 system with PU melting unit (capacity up to 6 kg/h), 2 kg adhesive container, QA glue application unit Pressure section: 4 pressure rollers Separating agent spray unit: Top and bottom application Joint milling unit: 2 motors, each 3 kW, 150 Hz, 9,000 rpm; pneumatically controlled for infeed milling operation Pre-milling unit: 2 motors, each 0.55 kW, 200 Hz, 12,000 rpm; double roller tracing; electro-pneumatic retraction End trimming unit (WK 13 – chamfer/straight): 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm; electro-pneumatic adjustment to 2 positions (flush and overhang) Profile unit FK 11 (manual): For processing edge overhangs top/bottom and trimming front/rear edges; 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm Universal milling unit UF 11: 1 motor 4 kW, 150 Hz, 9,000 rpm; swiveling 90°, electro-pneumatically controlled; HSK 63 F tool holder with push-button release Profile scraper unit PN 10: Pneumatic adjustment for lateral retraction from the working area Finish unit FA 11 (top/bottom): Glue joint scraper; cleaning fluid application; buffing unit with 2 motors; height-adjustable with upper pressure beam Machine control: 19-inch touchscreen operation Additional equipment Return conveyor system: BOOMERANG ZHR05Inclined air cushion table: length 2,000 mm, width 1,000 mmConveyor belt width: 1,100 mmWorkpiece parameters:Length: 300–2,500 mmWidth: 60–1,100 mm, or length 300–800 mm with width >1,100–2,000 mmThickness: 8–60 mmFor four-sided processing: Min part 300 x 300 mm; Max part 2,000 x 800 mm Inclined air cushion table: length 2,000 mm, width 1,000 mm Conveyor belt width: 1,100 mm Workpiece parameters:Length: 300–2,500 mmWidth: 60–1,100 mm, or length 300–800 mm with width >1,100–2,000 mmThickness: 8–60 mm Length: 300–2,500 mm Width: 60–1,100 mm, or length 300–800 mm with width >1,100–2,000 mm Thickness: 8–60 mm For four-sided processing: Min part 300 x 300 mm; Max part 2,000 x 800 mm Roller support rail for wide parts application type: Edge Banding Location: Germany machine type: Edgebander
About this machine
This Homag KAL 310 7 A3 is a used edge bander — sometimes referred to as an edge banding machine — manufactured in 2010 and currently located in Germany. Edge banders are used in woodworking and furniture production to apply edging strips of tape, veneer, or solid material to the exposed sides of panel workpieces, producing a clean, finished profile. Homag is a well-established German manufacturer of woodworking machinery, supplying equipment to furniture producers, joinery shops, and panel processing operations worldwide.
The machine is a single-sided edge banding unit equipped with a 28-position ISAS edge magazine, allowing up to 28 selectable edge rolls to be loaded simultaneously for rapid changeover. The gluing system is a PU 34 unit incorporating a polyurethane melting assembly with a capacity of up to 6 kg/h, a 2 kg adhesive container, and a QA glue application unit. A separating agent spray unit applies release agent to both the top and bottom faces of the workpiece. The pressure section comprises four pressure rollers to ensure consistent edge adhesion along the workpiece length.
The joint milling unit carries two motors, each rated at 3 kW, running at 150 Hz and 9,000 rpm, with pneumatic control for infeed milling. Pre-milling is handled by a separate two-motor unit, each motor rated at 0.55 kW, 200 Hz, and 12,000 rpm, featuring double roller tracing and electro-pneumatic retraction. End trimming is provided by the WK 13 unit, which handles both chamfer and straight trimming via two motors of 0.4 kW each at 200 Hz and 12,000 rpm, with electro-pneumatic adjustment to two positions covering flush and overhang configurations.
The FK 11 profile unit — manually operated — processes edge overhangs on the top and bottom faces and trims the front and rear edges using two motors, each 0.4 kW at 200 Hz and 12,000 rpm. The UF 11 universal milling unit is driven by a single 4 kW motor at 150 Hz and 9,000 rpm; it swivels through 90°, is electro-pneumatically controlled, and accepts tooling via an HSK 63 F tool holder with push-button release. The PN 10 profile scraper unit features pneumatic lateral retraction from the working area. Finishing is carried out by the FA 11 unit, which incorporates a glue joint scraper, cleaning fluid application, and a buffing section with two motors; the unit is height-adjustable and works in conjunction with an upper pressure beam.
Machine operation is managed through a 19-inch touchscreen control panel. The machine handles workpieces ranging from 300 to 2,500 mm in length and 60 to 1,100 mm in width, with thickness capacity from 8 to 60 mm. Wider parts up to 2,000 mm in width can be processed at lengths between 300 and 800 mm. For four-sided processing, the minimum part size is 300 × 300 mm and the maximum is 2,000 × 800 mm. A roller support rail for wide parts is included.
Additional equipment supplied with the machine includes a Boomerang ZHR05 return conveyor system and an inclined air cushion return table measuring 2,000 mm in length and 1,000 mm in width, with a conveyor belt width of 1,100 mm.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
