Machine Photos
Currency Finance
Finance Solutions
Creditpath
Equipment Financing
2012 - Homag KAL210 Ambitio Edge Bander
()- Listing No
- 988754
- Year
- 2012
- Manufacturer
- Homag
- Model
- KAL210 Ambitio
- Condition
- Used
- Location
- Belgium
- Price
- POA
- Description
-
Machine number: 0-200-26-3219 Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Max. panelsizes: 2000 x 800 mm., min. 300 x 150 mm Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil diameter 830 mm Equipment Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K 1 driven and 6 after pressing rollers End trims HL84 2 motors each 0,8kW Rough trimming 2 motors 1,5kW Contour trimming 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer Automatic adjustment infeed fence Automatic setting of pressure rollers Pneumatic setting of end trims Pneumatic setting of rough trims Automatic setting of chamfer/radius on the contour trims Pneumatic setting of profile and flat scraping units Electronic height positioning ZHR 05/L/085 (construction year 2001) Return conveyor for panels coming out of a single sided shaping or edge banding machine with fence at the left and with a length of approx. 8,5 m At the machine outfeed a tilting air flotation table brings the panels on the return conveyor belt Long panels pass a fence roller which turns them lengthwise on the return belt
About this machine
This Homag KAL210 Ambitio is a used edge bander — sometimes referred to as an edge banding machine — dating from 2012 and currently located in Belgium. Edge banders are woodworking machines used to apply and finish edge material to the exposed sides of panel products such as MDF, chipboard, and solid wood, producing clean, durable edges in furniture, cabinetry, and fitted interior manufacturing. Homag is a well-established German manufacturer specialising in woodworking machinery and panel processing equipment, serving furniture producers, joinery shops, and industrial wood processors worldwide.
The machine carries serial number and is configured with the fixed side on the left. It accepts coil edge material ranging from 0.3 to 3 mm in thickness and strip material from 0.4 to 20 mm. The coil diameter capacity is 830 mm, and an edge magazine accommodates two coils simultaneously. Panel dimensions range from a minimum of 300 × 150 mm up to a maximum of 2,000 × 800 mm, with a panel thickness range of 8 to 60 mm (standard 12 to 40 mm, with limitations outside that range). The minimum working width is 60 mm for panels 22 mm thick and 105 mm for panels 40 mm thick, with a panel overhang of 30 mm. Feed speed is variable between 18 and 25 metres per minute.
The gluing section uses a Part A20 quickmelt application unit, complemented by a lateral pressure zone K, one driven pressing roller, and six after-pressing rollers. A guillotine handles edges up to 3 mm. Edge heating is fitted, and release-agent sprayers are included. The end trim unit is the HL84 model, equipped with two motors of 0.8 kW each, with pneumatic setting. Rough trimming is handled by two motors of 1.5 kW each, also with pneumatic setting. Contour trimming is provided by two exchange units with automatic setting of chamfer and radius. Finishing is completed by profile scrapers (PN10), flat scrapers (FA11), cleaning-agent sprayers, and a buffing unit.
The automation package covers both straight and chamfer processing and includes automatic adjustment of the infeed fence, automatic setting of the pressure rollers, automatic chamfer/radius setting on the contour trims, pneumatic setting of the profile and flat scraping units, and electronic height positioning throughout.
Also included is a ZHR 05/L/085 return conveyor, manufactured in 2001, approximately 8.5 metres in length, designed for panels exiting a single-sided shaping or edge banding machine. The conveyor is configured with a fence on the left side. At the machine outfeed, a tilting air flotation table transfers panels onto the return conveyor belt, and a fence roller turns longer panels lengthwise onto the belt for correct orientation and further processing.
This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.
