2005 - OTT Profimatic M 2 Edge Bander

About this machine

This OTT Profimatic M 2 is an edge bander — sometimes referred to as an edgebanding machine — a woodworking machine used to apply and finish edge material to panel products such as MDF, chipboard, and plywood. OTT is a German manufacturer with a long-standing reputation in the woodworking machinery sector, producing edge banding equipment recognised for precision and durability. This example was built in 2005, carries machine number M/53084, and is currently located in Belgium.

The machine is equipped with a motorised height-adjustment system, allowing the working height to be set efficiently without manual intervention. A sound enclosure covers all trimming motors, reducing operational noise levels across the processing stations. Feed material can be supplied from both a coil magazine and a strip magazine, giving the operator flexibility to work with continuous tape or pre-cut strips as the job requires.

Edge application is handled by a hot melt gluing unit, followed by a pressure zone that ensures consistent bond adhesion along the panel edge. End trimming is performed by dedicated units covering both chamfer and straight profiles, and these are fitted with automatic adjustment, reducing setup time when switching between panel dimensions or edge thicknesses.

The machine proceeds through a full sequence of finishing stations. Top and bottom rough trimming removes the initial excess material, while separate top and bottom fine trimming units bring the edge flush to the panel face with greater precision. The fine trimming heads are tilting, enabling them to work at an angle for flush or slightly radiused results as needed. A contour trimming unit follows, addressing curved or profiled panel edges. A scraping unit then smooths any remaining trim marks from the edge surface, and a buffing unit provides the final polish, leaving a clean, finished appearance.

Completing the installation is a Ligmatech ZHR 05 return conveyor, which feeds processed panels back to the operator, supporting continuous workflow in a production environment.

This description was generated automatically from the listing details and may not reflect every specification. Please confirm with the seller before purchase.